rX-rated photos
I promised some more pics of my 84 GSL-SE and I finally got around to downsizing and compressing some for upload. I kept the size small for faster download. Hope you like them...
Interior shots... https://www.rx7club.com/forum/attach...postid=1258416 https://www.rx7club.com/forum/attach...postid=1258468 Exterior shots... https://www.rx7club.com/forum/attach...postid=1258568 https://www.rx7club.com/forum/attach...postid=1258581 https://www.rx7club.com/forum/attach...postid=1258513 https://www.rx7club.com/forum/attach...postid=1258539 https://www.rx7club.com/forum/attach...postid=1258547 https://www.rx7club.com/forum/attach...postid=1258558 https://www.rx7club.com/forum/attach...postid=1258562 She's pretty much stock, but then my street racing dayz have come and gone. (although, sometimes...) Guys my age are supposed to be out cruising in Ford Explorers or some such SUV lookin thing. - Never...! I do plan to replace the ignition wiring, coils, rotor cap, etc soon. And... just might get a Bonez high flow cat system. Just might... someday! |
https://www.rx7club.com/forum/attach...postid=1258468
I see you and I had the same bright cargonet idea :) a great, cheap mod that helps the daily 'livability' of these cars http://www.rotorhead.ca/mystuff/12.jpg |
pic#4=bling^2
very nicecar though. veeeery nice. |
Nice and clean :)
Is that the factory rear spolier or the Mariah version or another make? |
Pretty color man. I really like that. Kinda looks like a really cool laser red or something...
~T.J. |
clean. never been a big fan of those hatch shades though.
|
Beautiful car.
Kyle |
What are the seat covers? T-Shirts? Also, what is that on the back of the head-rests?
|
hey is that B-52 a stock option?!?!
|
Originally posted by Manntis I see you and I had the same bright cargonet idea :) a great, cheap mod that helps the daily 'livability' of these cars |
Originally posted by RotorMotorDriver Pretty color man. I really like that. Kinda looks like a really cool laser red or something... ~T.J. https://www.rx7club.com/forum/attach...postid=1207865 You asked about door jam painting in another thread. A quality shop will paint your door jams, preserving your decals with NO overspray on the interior. I had this photo but forgot to upload it for you... https://www.rx7club.com/forum/attach...postid=1260460 |
Haha, I was re-reading this thread to see what kinda stuff people had said, and I noticed they were painted in the first picture, and I was gonna comment on it. Then I got down here and you had just mentioned it. Maybe I remembered the color from your last thread..."laser red" just kinda popped into my head for some reason. It looks GREAT though. I love the color on the car, and the black wheels. Its amazing. Also, did you have the engine out when it was painted? I noticed the engine compartment is red as well. It does look damn good though :).
~T.J. PS - Im liking the background with the jets too, how suiting...Fast stuff :). EDIT: Damn, I just noticed that even the area around the hatch (drain areas) looks great. That paint job must have cost a pretty penny... |
Originally posted by Directfreak What are the seat covers? T-Shirts? Also, what is that on the back of the head-rests? [/B] |
Originally posted by RacerX7fb Nice and clean :) Is that the factory rear spolier or the Mariah version or another make? Can you imagine the TRAUMA involved with drilling holes in the body of a brand new car you only had a week :eek: I remember it as if it were yesterday! Originally posted by Gatorgunner hey is that B-52 a stock option?!?! |
Originally posted by Manntis https://www.rx7club.com/forum/attach...postid=1258468 I see you and I had the same bright cargonet idea :) a great, cheap mod that helps the daily 'livability' of these cars http://www.rotorhead.ca/mystuff/12.jpg |
As it states on my website, I took out the lower forward screw from each of the triangular mouldings inside the rear windows and used the longer but similar threaded screws that came with the plastic knobs for mounting the nets and screwed them in there. That way I can take 'em out and put the stock screws in to reverse the mod in the future without leaving a blemish. You'll also notice that my net is folded double, with all 4 corners going to the upper left and right and the middle of the net pinned under the metal trim bar running across the carpet. This provides a handy document pocket, though installing the net with equal tension throughout took a bit more effort.
When I first installed the net I attached them to the inside of the seatbelt anchors (as it appears Zookeeper did) but in my car it held the net vertical (looked aftermarket) and kept the belts from retracting properly, so they were always flopping around like the retractors were busted. By installing the knobs back by the rear window bases, I regained fully functional seatbelts and raked the net back at an angle mimicing the storage bins, so it looks like the car was meant to have the net there. Most people don't even know it's a mod, they just think the car was ahead of its time :) |
Originally posted by Manntis When I first installed the net I attached them to the inside of the seatbelt anchors (as it appears Zookeeper did)... https://www.rx7club.com/forum/attach...postid=1261887 That way it doesn't interfere with the belt at all and I can take it off without having to remove the swival bolt. If you pop the cap, you'll see there's plenty of room. But ur rite, they're for sure vertical. I like ur "document holder" idea - never thought of that. Be good for holding fragile items, too. Hmmm... |
I don't recommend you use it for 3-d items for very long - the net stretches, and can take hours to pop back into shape if you leave the item in there for a day or so.
|
why did you guys put cargo nets in the back of your rx7s?
i have an rx7 but i dont have a cargo net on it.. is it neccesary? |
Originally posted by timmya2 why did you guys put cargo nets in the back of your rx7s? i have an rx7 but i dont have a cargo net on it.. is it neccesary? Keeps those groceries where they belong during extreme deceleration! Got tired of scraping the eggs off my windshield |
Sweet car dude. Louvers aren't my thing, buts its sweet for sure.
|
https://www.rx7club.com/forum/attach...postid=1260460
who's Rx-7 is that in the background? yours? a neighbor? |
Originally posted by diabolical1 who's Rx-7 is that in the background? yours? a neighbor? |
before he junks it get the rear end out of it. I'm sure someone here wants it.
|
Originally posted by Manntis https://www.rx7club.com/forum/attach...postid=1258468 I see you and I had the same bright cargonet idea :) a great, cheap mod that helps the daily 'livability' of these cars http://www.rotorhead.ca/mystuff/12.jpg Ok, call me stupid, but, um, i know, im making myself look really stupid here, but Where is the back seat????? or dont they have them in US delivered models? |
All times are GMT -5. The time now is 06:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands