rubber for drip molding
I was wondering if you can get replacement seals/rubber lining for the drip molding (the stuff above the windshield and doors)
|
AFAIK its mostly NLA from Mazda. Not aware of any after market source. Might check the catalogue with Blackdragon.com
Stu Aull 80GS Alaska |
i believe those seals were never sold seperatly and required purchase of the entire trim piece..
|
well, thats not good news.
|
Originally Posted by mazdaverx713b
(Post 9915239)
i believe those seals were never sold seperatly and required purchase of the entire trim piece..
|
I've done the best I could pushing what's left of the seal back in place under the trim, then filling the gaps with silicone. If you are careful it doesn't look to bad and at least it keeps the water out.
|
i believe they sell the seals on blackdragon if your tlkin about the ones between the top windshield trim and the roof.. i just bought some about 6 months ago... i didnt even use them.. my old 80 doesnt even have them
|
I took a look in the black dragon catalog and didnt see it. I'll have to check again
|
BD calls them rubber dums i think. They only have like two of them (one side for the top trim and one for the bottom so I wonder if you can just flip them around they will work. I thought they are just there to prevent the drip moldings from scratching the paint.
|
All times are GMT -5. The time now is 04:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands