RCA now available for old school RX
|
thats cool but uh thats been around for awhile by other companies
|
We only support forum paying vendors. :rlaugh:
|
what do they do? i thought the lower control arm and tie rods were supposed to be parallel with each other.
|
Originally Posted by rxtasy3
what do they do? i thought the lower control arm and tie rods were supposed to be parallel with each other.
Somewhat correct. The locations of the inboard control arm pivot and the outboard ball joint pivot define the roll center. When the vehicle is lowed the ball joint stays where it is but the inboard pivot point moves towards the ground. Roll Center blocks go between the steering arm and the bottom of the strut to move the ball joint down to match the two pivot points back up to stock. Effectively raising the roll center back up. -billy 1" Rx3, 1" Rx7, 1.5" Rx3, 1.5" Rx7 and 1" Rx2 Roll Center Blocks in stock! |
ok i get it now. a google search reveiled quite abit of info: http://www.google.com/search?sourcei...&q=roll+center. leads me to think that this is really more for road racing/autox to get the absolute best handling possible, and not so much needed for DD. unless ur really keen on having an excelent handling street car.
|
Originally Posted by wackyracer
We only support forum paying vendors. :rlaugh:
|
All times are GMT -5. The time now is 04:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands