please help.
 

Looking for someone in queens that has time to help me put back my Intake manifold and carburetor. I took them Out to clean, now having trouble putting it back . 83 rx7

welcome to the board. :)

what sort of trouble are you having?

The new guy .
 

Hello and thank you for answering, so I unscrewed it from the engine to clean , I displuged everything from the carburetor and now I dont know where everything goes ,I didnt take pictures.

The new guy.
 

I will pay for the help. I'm just trying to get this car to turn over and hear it for the first time,

We can help guide you to get this back together. Post some pics of the current state of the carb/intake/rats nest/ and engine.

Here is a reference to help get you started.

https://cimg1.ibsrv.net/gimg/www.rx7...8e92efd634.jpg
https://cimg2.ibsrv.net/gimg/www.rx7...2abca0b630.jpg
https://cimg6.ibsrv.net/gimg/www.rx7...9dab17faff.jpg
https://cimg9.ibsrv.net/gimg/www.rx7...6f8987bab5.jpg
https://cimg1.ibsrv.net/gimg/www.rx7...4593050219.jpg
https://cimg2.ibsrv.net/gimg/www.rx7...1d28ce71fd.jpg

Dang KC, I don't remember seeing that one before.

Did you just build it?

jcrack5635 you can get all the help and information you need right here.

Just post lots of questions and pictures.

After two rebuilds by two different people, found out one of the irons had a crack in a water passage.

It now how NOS rotor housings and a better set of irons. The irons have been repainted with the cast iron color paint. This was done several tears ago. I still haven't put it on the road. Just finishing up small stuff.

https://cimg6.ibsrv.net/gimg/www.rx7...552c362e89.jpg