Ok... Today was a sad,and happy day all in one.
 

Well today was the beginning of my project of distruct and redo.I took my baby out to see if I can blow her up one time before I rebuild her.

http://russell.russty.net/vids/SoRRoWs%2084%20GS.mov


Heres some of my latest pics,I felt depressed goign to the races last night with no dam 7 on the road,and I have been bullshitting on redoing my own car so I decided to start today .. heres soem new pics


http://web.tampabay.rr.com/rotary7/7/

*Need Quicktime to view the movie*

I feel bad for that one tire ;) It isn't getting to have any fun.
Looks like you did though.

Later
Randy

actually i see two tire marks. do it a couple of times? :D what where you dropping the clutch at?

Slowed it down and watched it a couple more times, and I think you are right. Looks like there is another mark over there :bigthumb:

Later
Randy

when you rebuild get rid of that beehive oil heater and switch to an air to oil cooler :D good luck!

haha, nice burnout man. Guess I missed something, whats the story with your car? what are your plans etc.

What do you mean dropping the clutch ...thats a power brake,if you go to the other link where the pics are its in there somewhere,

Yes it did burn 2 tires,no its not posi,It does look liek the only the left tire burn but think abotu it,what tires has the torque?Its suppose to be the right..

Im bridgeporting the secondaries,and large street on the primaries,I got to port match my exhast and intake to the housings,then once its broken in I need to rejet,on a dyno,

Yes I do need to change the oil cooler,I wanted to just use this car at the drag strip and on short runs the air cooled cooler is not muxch better than the water cooled,

Im debating on what color to paint it,I have been talking about painting it like a Chevy orange for about 2 yrs now,and I need to decided asap cause the engine bay will be painted when the engine is out,then the engine will be paint to match..

I need to know how hard to add a TII tranny to my car,cause i can get one for $200. right now.I heard I had to change the tail shaft or some shit.I still need a GSLSE rear end,

Whas the flywheel/clutch size on a 84 n/a tranny and S4 TII tranny? I will keep updates posted.. :D

I cant post the dam pics,just go to the secodn link and look

Cool, sounds like a good project. The clutch drop question is still valid, unless your slipping hte hell outta it when you start powerbraking it. When I do that I just rev it and pop the clutch and mash the gas. Anyway, what muffler you got on there? Sounds pretty sweet.

nice spin, good to see not all these cars have lost their brakes from sitting (most of them, anyways)



My day was good!!!



Glad to hear someone lovin their car also.




Laters

On the power brake,I got the left foot on the clutch,Right foot toe on the brake,right foot heel on the gas,

Push down on the brakes,
Keep the clutch in,

Pump the gass with your heal,Let off clutch around 4k (?)

Give it more gas,put left foot on brake and slide the right foot all the way to the gas,

Then when your ready ...let off the brakes :D

My exhast set up is RacingBeat road race header,
"Y" off to about 15-18inches,To 2 1/2 in exhast to a
' twister muffler" non fiberglass metal muffler to back to the 2 1/2 in exhast to a DTM tip Mozart myuffler I picked up about 3 yrs ago for $50. Konig makes Mozart

http://www.flopro.com/Twister.htm

I get magnaflow for a decent price,almost wholesale cost and cheaper than anyother place sold online.

www.magnaflow.com

I have been thinking of going with a 1 can set up...I will see after my port work how my exhast reacts cause im race porting the exhast.