oil leakage under the oil filter unit
Hey guys,
Listen, I've had this oil leak since we went to Vegas. It happened on the road after we hit a fairly good size bump( damn highway dept.) :wallbash: I was wondering how likely would it be that I cracked the rear main seal but it looks like its coming from underneath the oil filter box and maybe what other problems it could be?? Thanks fellas |
I have a pretty consistant drip/leak from the oil vent tubing in the rats nest. Thought it was from the honey comb, I even changed the honey comb seals.
|
Originally Posted by phalerider
(Post 8706959)
I have a pretty consistant drip/leak from the oil vent tubing in the rats nest. Thought it was from the honey comb, I even changed the honey comb seals.
Pics/more info would be great. Thanks |
Originally Posted by rotaryPOWAH
(Post 8706921)
Hey guys,
Listen, I've had this oil leak since we went to Vegas. It happened on the road after we hit a fairly good size bump( damn highway dept.) :wallbash: I was wondering how likely would it be that I cracked the rear main seal but it looks like its coming from underneath the oil filter box and maybe what other problems it could be?? Thanks fellas |
Originally Posted by rotaryPOWAH
(Post 8706998)
So, are you saying that the leak could be the hoses? :Wconfused
Pics/more info would be great. Thanks BTW i found a butt load of bad tubing and that flying saucer looking thing across from the oil filter in the rats nest had a broken fitting in the bottom. I love fixing the last guys problems, not that I'm bitter about that. Before I fixed it it dripped down the block around the oil pan to the reactor, smoked like hell when I pushed it The oil vent tubing runs from the bottom of the fill tube to a "T" in the corner of the rats nest then to that flyin saucer thing. I cant think of the name of the flying saucer thing, beer will do that. So, just as a suggestion, inspect and replace the tubing as nessasary |
85 gsl se,I have a oil leak as well,below the oil filter housing.Right near the sending unit.I think its the sending unit.These fail alot on other cars that i have seen not sure about rotaries.i also plan on changing the two o rings under oil filter housing.There is another sneding unit.next to oil presure sender.So not sure which one is leaking.I will just change both senders & o rings.Should solve my probelm.check to make sure the heater hose that is close to the sender is in good shape as oil destroys rubber.Josh.
|
All times are GMT -5. The time now is 03:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands