oil cooler lines
 

my friend works at a hydraulic shop and we were thinking of making these if there was any interest. will post pics once he gets the first set made.

Depends on Price and Quality.

Yeah, low quality, high price. I'm in for shure.





Haha! this is a good idea. Get Ben to work asap!

it is easier just to buy a couple of feet of brided line and some fittings

not everyone has the means to get metric fittings and to crimp the fittings. ;)
just wanted to see if people needed/wanted a cheaper alternative than mazdatrix or wherever people get them.

You don't have to crimp the fittings. I used braided (as opposed to the brided line that aspirao recommends :rlaugh: ) line and Aeroquip fittings to make mine.

Rich

I had a local shop cut the metric ends off of mine and reuse them onto some high grade hose. I think it was $45 or so, maybe less..
On the rear one with the banjo bolt, I think you can replace it and use an aeroquip 90 degree end and a M18x1.5 to 5/8 adapter.. I plan on doing that eventually.