No Brakes
Hi
weekend cruiser / hobby car experienced brake failure. purchased new master cylinder, S.S. brake lines and bleeder valves. plan on purchasing Hawk street pads to complete the job. (recommendations?) anything else i should do parts wise while tackling this job? any suggestions on bleeder or vacuum type pump to help? thanks |
Get speed bleeders. They make it a one person job. and no need for vacuum pump. They have a one way valve.
|
If you like dust and noise stay with the hawks. I switched to ceramic pads which seem to work well and have no dust to speak of and no noise. I could not tell the difference on hard mountain drives. On the track a lot, then the hawks may be best.
|
My Hawks are silent. Dust as per stock. FWIW. ;)
STRONGLY urge you to consider first bench-bleeding the master cyl before install. My experience they have been a major biotch to get air out of them once in the car. This is a pretty common practice, with lots of Google write-ups on How-2. Speedbleeders are fab. Stu Aull 80GS Alaska |
thanks
thanks for the info
speed bleeders ordered |
All times are GMT -5. The time now is 03:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands