RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Nikki fuel inlet, outlet to npt (https://www.rx7club.com/1st-generation-specific-1979-1985-18/nikki-fuel-inlet-outlet-npt-968206/)

jswisc 09-03-11 01:22 PM
Nikki fuel inlet, outlet to npt
 
I have an ITA rx-7, 1st gen. I'm replacing all the plumbing from the fuel cell to the carb w/ 6an stainless braided lines w/ aluminum Aeroquip fittings. All is well but the in/out of the Nikki is made for a friction fit hose and clamp. Anyone know of a compression fitting or something similar that will give me a NPT thread?

CobraStngSVT 09-03-11 03:24 PM
Originally Posted by jswisc (Post 10772815)
I have an ITA rx-7, 1st gen. I'm replacing all the plumbing from the fuel cell to the carb w/ 6an stainless braided lines w/ aluminum Aeroquip fittings. All is well but the in/out of the Nikki is made for a friction fit hose and clamp. Anyone know of a compression fitting or something similar that will give me a NPT thread?
I took a NPT fitting and soldered it on. It's worked for years...

Kim 09-03-11 04:25 PM
IIRC, the thread/pitch is M12x 1,25 or 1,50
I used the fitting from either my Weber or the OER carb.


All times are GMT -5. The time now is 12:47 PM.


© 2024 MH Sub I, LLC dba Internet Brands