Need Help Identifying Wire
2 Attachment(s)
Okay guys I need your help. I'm almost ready to pull my 12A out but there's one more wire that needs to come out and I don't know what prupose this wire serves, nor how to get it out. I have it pictured. It's on the rear iron just below the beehive. And I'll throw in an extra picture of the status of my pull. Thanks for the help!
|
If I recall correctly, it should unplug from the sensor. I recall mine being a real bitch to get unplugged though, had to use pliers and try not to snap the peg off the sensor. Anyway, that's the way I remember it...
|
The pic is fuzzy as hell, but I think your talking about the water temp sensor on the rear iron. That will unplug, but it can be a pain to remove.... Good luck!
|
Thanks guys, yeah I've yanked it but there isn't a whole lot of room to work with the beehive being there. Good to know it'll just pull out. I wanted to just cut it but I didn't know what it was to so I didn't want to risk it LOL. Sorry the pics are aweful I used my dad's digi cam from the late 90's that still uses floppy discs LOL
|
All times are GMT -5. The time now is 04:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands