my rattle can engine bay
5 Attachment(s)
ok so its takin a week of mucking around,getting stoned,bein lazy,getin laid but finally i have finished it and am quite pleased with my effort
there was mistakes and lots of sanding lol https://www.rx7club.com/attachment.p...d=189720&stc=1 https://www.rx7club.com/attachment.p...d=189722&stc=1 https://www.rx7club.com/attachment.p...d=189728&stc=1 https://www.rx7club.com/attachment.p...d=189729&stc=1 https://www.rx7club.com/attachment.p...d=189731&stc=1 |
2 Attachment(s)
https://www.rx7club.com/attachment.p...d=189734&stc=1
and this is whats going in a stock 12a 40,000miles with 120psi on each face https://www.rx7club.com/attachment.p...d=189735&stc=1 |
Very nice work man! How long did it take you in actual (sober type) hours? :)
|
Very nice job!!
I wish I had the patience to do that. |
Originally Posted by Kentetsu
Very nice work man! How long did it take you in actual (sober type) hours? :)
|
wow that looks really good, how didu paint the rotor housing, did u mask them off?, i wanna do mine like that but in revers colors. looks awesome by theway, hold on i think i said that already:)
|
hahaha i just wire wheeled the engine thats a old pic iv got it shinyer now maybe ill coat it with some clear paint
|
lookin' good. always a great idea when the engine is out. so many people dont bother but it makes it look so much better.
|
Originally Posted by blwfly
hahaha i just wire wheeled the engine thats a old pic iv got it shinyer now maybe ill coat it with some clear paint
|
y do u have the starter wired to the battery on the engine pic, i just noticed it and i was curious?
|
^ i was wondering that too......
compression test while its out. maybe? |
1 Attachment(s)
|
o, good idea, how did it turn out?
|
as i said before 120psi but ild imagine it would drop to 100 after running some time
|
o, thats good still, my bad i forgot u said it before.so how long before u get it all together?
|
nxt weekend probaly haha wouldnt count on it itl be running but i have a whole front end to paint from blue to black
|
o, post a new thread with pics when ur done, i wanna see ho good it looks. :bigok:
|
will do mate
|
Looks good!
i wish i could take pictures of mine, i just used roll on paint to do mine. it saves a lot of time from removing crap and it came out pretty nice. i used that rustoleum stuff that everyone is painting their cars with nowadays. goes on SUPER thick and is some pretty tough crap when its dry. |
Looks good! Where you standing on the roof again on that overhead pic? LOL
|
haha shhh dont tell anyone our secret
|
ahh update
3 Attachment(s)
|
Looking real nice
|
How old is that header or is it just oil coated. I have seen them discolor from heat but never like that.
|
Originally Posted by Kim's FB
Looks good! Where you standing on the roof again on that overhead pic? LOL
Looks good Chris, keep it up. |
All times are GMT -5. The time now is 01:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands