My POS runs after 6 months! (many pics)
I'm lazy, I only worked on it for about a hour a day once a week or so. I'd forgotten how good Webers sound :)
https://www.rx7club.com/forum/attach...&postid=520796 https://www.rx7club.com/forum/attach...&postid=520813 https://www.rx7club.com/forum/attach...&postid=520818 https://www.rx7club.com/forum/attach...&postid=520827 https://www.rx7club.com/forum/attach...&postid=520834 https://www.rx7club.com/forum/attach...&postid=520836 |
is that a 2nd gen wheel?
|
Here's some more. I'm not all the way done, so don't give me shit for the messy engine bay :)
https://www.rx7club.com/forum/attach...&postid=520843 https://www.rx7club.com/forum/attach...&postid=520855 https://www.rx7club.com/forum/attach...&postid=520865 https://www.rx7club.com/forum/attach...&postid=520872 https://www.rx7club.com/forum/attach...&postid=520878 |
Originally posted by yayarx7 is that a 2nd gen wheel? |
I just broke my turn signal canceler on my SE. CRAP!
|
Man, I've gotta get a set of those rims. But you're right... nothing beats the sound of a big Weber at full throttle. Well almost nothing.
|
:) I'll take the turn signal canceler or whatever its called I NEED ONE!!!! 84-85 , I got one from an 80 but its too big and dont work correctly :)
By the way I see the hammer, best tool every made except for duct tape :) |
I think you have to get the whole universal switch. I did last time it broke. Hit the junkyard and find a FB without the colapsed steering column and snag it. I will later this week.
|
ok, now take a few more pictures of the surrounding area...I swear that car will be gone by morning :D j/k man, nice car though :). I like the blue/silver rotor housings.
~T.J. |
find a FB without the colapsed steering column ~T.J. |
yes, they have a plastic injected pin in the two parts of the steering column. a blow will break this pin allowing the column to colapse. A safety thing. I have had three cars where this happened without a wreck, I think these things get brittle after a time. The only fix is to pull the column or to get at the column without pulling it, and drill a hole and fit a pin. PITA. be very careful when pulling your wheel or working on your column. Usually if this happens the universal switch gets broke because of the steering wheel canceler thingy protruding too far into the switch.
|
yayarx7,
You can change out just the cancel cam by itself. Felix, Is that a Purolator regulator I see? tsk, tsk, tsk! |
what did you paint the block with?
cheers' |
What color paint does the car have on it? Is that some type of blue?
|
The car is Tender Blue Metallic and I painted the engine with regular old engine paint.
|
Hey felix what offset and how wide are those rims ?
|
Looks awesome Felix!
I especially love the rims and the blue/silver housings. It's amazing how roomy the engine bay looks once you get rid of all the stock crap. |
NICE!, 45mmDCOE right?. Did you rebuild the motor and if so street or bridge?. Hows it run with that carb?.
|
The motor is a stockport 12A out of another car. It looked like this when I started:
https://www.rx7club.com/forum/attach...&postid=521685 :) My rims are 15x7. Not sure of the offset. |
Originally posted by yayarx7 yes, they have a plastic injected pin in the two parts of the steering column. a blow will break this pin allowing the column to colapse. A safety thing. I have had three cars where this happened without a wreck, I think these things get brittle after a time. The only fix is to pull the column or to get at the column without pulling it, and drill a hole and fit a pin. PITA. be very careful when pulling your wheel or working on your column. Usually if this happens the universal switch gets broke because of the steering wheel canceler thingy protruding too far into the switch. |
All times are GMT -5. The time now is 03:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands