RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   More Power Please!!! (https://www.rx7club.com/1st-generation-specific-1979-1985-18/more-power-please-337269/)

jeremyt 08-11-04 09:59 AM

More Power Please!!!
 
I have a K&N air filter on my Mikuni carb. I get a lot of power but I feel there is not enough air flow to the air filter. Does anyone know what I should do to extend the air intake (i.e. were to get parts for an 84 gls-se etc.) What is a cold air intake. Can I use one on a carburetor converted 13B?

Pele 08-11-04 11:04 AM

Cold Air Intake is just that, It takes in cold air from outside rather than hot air from inside your engine bay...

The reason is that cold air is more dense...

Let's say for the sake of arguement that 1 lb of air will fit in a 1 gal milk jug... This is at room temperature...

Warm it up to 100-120 deg like inside your engine bay, and you might only get 3/4 lb of air in the same milk jug...

Cool it down to 50 of so deg and you can cram maybe a a pound and a quarter in the same jug...

So... There's a specific mixture of Fuel to air that the engien will run BEST at... For piston engines it's like 14.7 lbs of air to 1 lb of fuel... For the rotary, it's 12 air to 1 fuel... or so... Well, with colder air, you can cram MORE air into the same space... More air means you can mix in MORE fuel... More fuel and air = MORE power...

However since you have a carbed SE, it's probably gonna be a custom job... In fact a lot of CAI's are custom... I'm sure someone can post better ideas, but your best bet is to find a way to pipe air in from the outside, from in front of the radiator...

A good way is to get it through the hood... Remember, due to the areodynamics of cars in general, there's a good high pressure point right in front of the windshield... Hence Cowl induction... Scoops pointed forwards don't do so much for induction...

A lot of this, I've gained from surfing around here... If anyone has any corrections, please let me know.

kokujiro 08-11-04 11:29 AM

My suggestion would be to search the archives on this. There are MANY different configs for CAI, and I've seen some pretty good ones in here. They are going to require some modification, but if you want more power then that should go without saying.

http://www.mazspeed.com/coldairintake.htm

This is just one example.

elvisjer 08-11-04 03:25 PM

just fill yer engine bay with ice

YapaKanichi 08-11-04 10:50 PM

SP It.


All times are GMT -5. The time now is 03:21 AM.


© 2024 MH Sub I, LLC dba Internet Brands