RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Mini-update: Rising from the ashes (Rust flakes) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/mini-update-rising-ashes-rust-flakes-760453/)

Box_Man 05-31-08 01:24 AM

Mini-update: Rising from the ashes (Rust flakes)
 
It's not dead yet!

http://img.photobucket.com/albums/v3...0/IMG_1467.jpg

It all started when I got side swiped by a blonde in a Lexus RX300. All the Panasports got curbed, seal in the steering box was damaged, making all the fluid leak out all over my garage floor, and the passenger side was all scuffed with some dingage on the trailing edge of the right fender, and leading edge of the door.

This got the car off the road initially, then I found the rust.
http://img.photobucket.com/albums/v3..._broken013.jpg
http://img.photobucket.com/albums/v3..._broken012.jpg
http://img.photobucket.com/albums/v3..._broken007.jpg
http://img.photobucket.com/albums/v3..._broken006.jpg
http://img.photobucket.com/albums/v3..._broken015.jpg
http://img.photobucket.com/albums/v3..._broken002.jpg
http://img.photobucket.com/albums/v3...7013385526.jpg
I'm still mad :wallbash:

Box_Man 05-31-08 01:25 AM

So with $2350 from the bitches insurance company, I'm about to order a ReSpeed rack & pinion kit, strut bars, rear links, and install all my other shit (bushings, racingbeat springs, Tokico Illuminas, etc.) Not to mention get the wheels machined back to their former perfection.

After a year of my bullshit (not working on the car like I should be, no excuses) This is where I sit.
http://img.photobucket.com/albums/v3...0/IMG_3442.jpg
http://img.photobucket.com/albums/v3...0/IMG_3461.jpg
http://img.photobucket.com/albums/v3...0/IMG_3463.jpg
http://img.photobucket.com/albums/v3...0/IMG_3462.jpg
http://img.photobucket.com/albums/v3...0/IMG_3464.jpg
http://img.photobucket.com/albums/v3...0/IMG_3465.jpg
http://img.photobucket.com/albums/v3...0/IMG_3466.jpg
http://img.photobucket.com/albums/v3...0/IMG_3467.jpg
http://img.photobucket.com/albums/v3...0/IMG_3469.jpg
http://img.photobucket.com/albums/v3...0/IMG_3446.jpg

Box_Man 05-31-08 01:26 AM

Here's the source of some sheet metal, suspension, Holley fuel pump, fuel tank (I FUBAR'd mine accidentally), and some other things.
http://img.photobucket.com/albums/v3...0/IMG_3451.jpg
http://img.photobucket.com/albums/v3...0/IMG_3449.jpg
http://img.photobucket.com/albums/v3.../dash006-1.jpg

Those panasports, and everything else on the car are for sale by the way (send me a PM)

twinkletoes 05-31-08 02:23 AM

Nice! Was wondering how panasports would look with formula white 1st gens. Looks great! Looks like it's going to turn out better than before. I have that same exact rust spot on my 83 GSL behind the bins, not as much though. How hard was cutting it out and putting new metal in? Looks like you just put some patch over the the rust on the drivers side? Keep us posted on getting her back on the road.

Box_Man 05-31-08 02:28 AM

It's a huge bitch, it helps to have special tools (Spot weld bit, nibbler, all the grinders and associated metalworking tools) and welding skills though.

All the rust on the passenger side was cut out in squareish patches, and 22g sheet metal welded in over the holes with a 1/2 inch overlap, welded on each side, and a panel of 16g welded on the outside as a reinforcement. The drivers side will be the same, but I only have the rusted metal removed so far.

And USE WELD THROUGH PRIMER AND SEAM SEALER! This will keep the metal between the welded sheets from rusting like the stock ones did.

twinkletoes 05-31-08 02:34 AM

Cool man, thanks for the tips. Keep up the good work! Hope everything goes smoothly for ya.

RXDad 05-31-08 05:01 AM

OT. Sorry for the hijack... but is that an extra 280 in the ceiling of your garage?

Talk about having lots of cool toys.

RXDad

TheRX7Project 05-31-08 09:45 AM

You call that RUST?

Box_Man 05-31-08 01:00 PM


RXDad
OT. Sorry for the hijack... but is that an extra 280 in the ceiling of your garage?

Talk about having lots of cool toys.

RXDad
That's a 30% Extra 260, what you can't see is the 27% Mitsubishi Zero, 35% Extra 300S, and the 40% full composite Extra 300 behind me. Those are my dad's, all the smaller, 4 stroke planes above the Mazda are mine (there's a Gas powered Hydro (boat) up there too) And a wall of RC cars in front of the 7. And people wonder why I never get things done on my car in a timely fashion. :hahaha:


TheRX7Project
You call that RUST?
I'm iron-oxide phobic. :suspect:

Vashner 05-31-08 02:04 PM

Nice repairs. On mine I sanded stuff and then put Hammerite Rust cap. Then 2 coats of POR 15 gloss black on top of the Hammerite.

old_skool 05-31-08 05:36 PM

nice repairs. i found the same stuff on mine (on the frame rails too), so i just bought a clean body and am in the process of swapping EVERYTHING over.

you have cool toys too :icon_tup:

82transam 05-31-08 07:19 PM

Nice job on the repairs, reminds me of what I had to do on my cars, fun stuff haha. I'll be pming you in a minute about some of the parts off that car...


All times are GMT -5. The time now is 04:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands