cpt_gloval

iTrader: (1)

Hey y'all, I was wondering if I am missing something with installing the Racing Beat air cleaner. I have the threaded rod and wingnut and everything is secure, but it seems like the metal-on-metal contact at the base of the air cleaner/top lip of the carb needs like a little gasket or something so air doesn't leak past any small gaps that might be there. Am I in crazy town.and this is how it's supposed to be?

diabolical1

iTrader: (3)

I don't remember one coming with mine. Then again, I bought mine around 1991. However, I'm sure it's fine. If it bothers you that much, you could probably put thin layer of oil at the interface and call it good.

GSLSEforme

Jeff20B

iTrader: (13)

There is no gasket and it is worrisome. I've added a one and also added a circular piece of radiator hose for the wingnut. But does tightening against rubber really work? It does if you also have a cotter pin or a spring clip that goes through a small hole in the stud. The keeps the wing nut from turning and loosening.

t_g_farrell

iTrader: (1)

I used some small vacuum tubing that I sliced down the length to seal my after market air cleaner. Works like a charm. Just pushed it on over the lip of the bottom of the horn.

You could also just get some gasket material and make a ring that fits on top of the carb lip.

GSLSEforme

Should have read thread title more thoroughly,thought it was a Holley...