Ignition Coils to replace factory
Are the stock 1st gen RX7 coils a typical HEI style non ballast 12v coil? Or are they rotary specific?
Before swapping them out for some MSD's I wanted to make sure they weren't special due to the more rapid discharge the 7 warrents. I did use the search function but I found conflicting information. It looks like a typcial MSD Blaster 2 Canister coil would work sweet. Thanks -Paul |
YES. NO. both questions answered.
|
I had a nicely typed answer up,then noticed it is For FB,not FC..sorry My friend..Bump for you.
|
yes the blaster 2's work great, I run 3 of them with a MSD 6AL ignition
|
Excellent! Thanks guys!
|
just recently got my MSD setup (6AL and two blaster 2s) on my leading ignition, DLIDFIS as they call it around here. and man it really helped in a lot of ways. smoother more consistent power band, better idle, eaiser starting in the cold, and about two more miles per gallon avg....the engine just sounds way healthier/stronger. oh, and i should mention that i upgraded to this from a stock SA (original '79) breaker point ignition setup, so i'm sure this is one reason i noticed such a dramatic improvement.
|
Originally Posted by mortiky
(Post 8784574)
just recently got my MSD setup (6AL and two blaster 2s) on my leading ignition, DLIDFIS as they call it around here.
|
ah...ok, i was thinking this was what everyone was calling this setup. just because it has the individual coils for each leading spark plug it is not a DLIDFIS, which i still do know what that stands for, maybe i need to do a search.:)
|
All times are GMT -5. The time now is 10:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands