holley/edelbrock V.S stock??
 

First off I am a newbie to the rx-7. I have a 1982 gsl with the 4 barrel/lsd rear. Here's the Q.......
Can you run a edelbrock or holley (spread bore)on my stock intake. Does a different carburetor work well with a stock intake and has it ever been done and will it bolt on??? I was thinking of a brand new edelbrock or holley. The Rb intake comes with a 465 cfm carb and I can get just the carburetor from summit for 380. I was leaning towards the 500 cfm edelbrock since I have used them on v-8's(bigger cfm) before with good results and besides that there only 274 bucks new v.s 380 for the holley. Or would it be best to just keep the stock one. I work at a machine shop and have access to all machine,so I could build a carb adapter if I had to. Basically.....like I said,I need to know if any one has ever tried this on a stock intake or if it has any pro's v.s the stock? Thanks for any input/info!

Go to the bottom of this page. You will see related threads on the subject.
If those do not answer your question then please search with the listed key words.
This topic has been over covered.:-)

Forgot to add. When you find a thread on the subject. If you have further questions then bring that thread to the main page so we can add information to it.