gsl se rear end swap
 

I just swapped a gsl se rear end into my gs and am trying to source the hose that goes from the main brake line to the rear axle. I have tried searching for this part, I think I found it but am not positive. Is it part number 43810b from mazda? Or am I at a loss and need to fabricate my own hose from a local hydraulic hose shop? Or has someone fabricated there own part or parts? Any input would be appreciated, I cant move my car and drive without my brakes lol

You can use the soft clutch line...iirc that's how I did one of my rush projects

get a flaring tool and some hard steel brake line and just bend yourself a new brake line to the rear and then run the brake hose to it...

I have two Rx-7s at the junkyard near my house with this part. I can get it and ship it to you. let me know. It would be original but im sure in good shape. I did this same swap about ten years ago.

helopilot85@yahoo.com

Brad

Rear Brakes - Pads, Rotors, Shoes, Drums, Calipers, Kits, Hardware

they ship fast too!

Thanks for all the input guys, trying to source parts from a member on the forum