GSL-SE needs DP for stock turbo
 

Will a 2 Gen TII DP( or aftermarket 3") work on an GSL-SE using a factory turbo on Factory manifold?
Does it line up with the space for original exhaust, or will I have to mod it?
only one exhaust shop in my little town. and I would have to provide all the pieces. Might as well build it myself, but I would need the DP to get started

??? gslse's never came turbo from factory. if u want to use a dp for tha turbo you installed then make sure its from the same year. gotta check my s5 in tha morn to answer that one. depenends on how high they mounted tha turbine on that SE

Are you using a GSL-SE engine or a factory TII engine?

If using a GSL-SE engine, have you already bolted the intake manifold and the stock TII exhaust manifold together? Because they shouldn't fit together.

If you are using a full TII setup, the RB down pipe should work.

I'm using a n S4 TII engine and turbo. DF did you use 3" all the way back on yours, did you go over the axle or under?

3" Downpipe to
3" Magnaflow "oval" center muffler" to
3" exhaust over the axle to
3" Magnaflow "round" rear muffler.
4" Exhaust tip

HTH.

Perfect, Thanks

i could build u a downpipe modeled off mine, then you could drive it to my shop and ill build you a whole exhaust for a good deal :D you got my number if your interested.

sounds good. 3" is going to be sweet. Thanks for the heads up text this AM. I'm going to Salem this coming weekend.