Going insane!!!! Help 84 gsl-se 13b
#1
Rooster
Thread Starter
Join Date: Nov 2010
Location: Tacoma, WA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Going insane!!!! Help 84 gsl-se 13b
ok...I have worked over this damn thing with a fine tooth comb. I have a 1984 GSL-SE/13B non turbo, 145K miles. I had it driving 2 weeks ago after a year long partial mechanical restore (next comes the body...Oh joy). New plugs, new wire, new distro and roter, new coils. Engine completely rebuilt (Props to the Guys at Adkins Rotary in Puyallup WA). Removed Curise, and installed aftermarket air filter. Completely replaced the rats nest with new tubing. Haven't really tweaked much on the engine since it was rinning just fine for about a week.
Parked it when I came home 2 weeks ago and the next day it started up fine and idled for about 5 mins then died. I let it sit for 30mins and it started up again.....2 mins later it died. Didn't step on the gas or anything.....just dies and wouldn't start. Next day same thing......Day after that It won't even start anymore. It turns over and sounds like it really wants to start. Whats even more odd is that I started smelling fuel and found a puddle leaking from the connections between the header, exhaust, and cat back. It is acting like it has a vacume leak but I haven't been able to find one.....I am at my whits end and its starting to get expensive
Parked it when I came home 2 weeks ago and the next day it started up fine and idled for about 5 mins then died. I let it sit for 30mins and it started up again.....2 mins later it died. Didn't step on the gas or anything.....just dies and wouldn't start. Next day same thing......Day after that It won't even start anymore. It turns over and sounds like it really wants to start. Whats even more odd is that I started smelling fuel and found a puddle leaking from the connections between the header, exhaust, and cat back. It is acting like it has a vacume leak but I haven't been able to find one.....I am at my whits end and its starting to get expensive
#6
Rooster
Thread Starter
Join Date: Nov 2010
Location: Tacoma, WA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
It smells like fuel and its sooty. Also I replaced the seals on the injector and diffusers.....learned that the diffusers are kind of necessary.....hmmmmm now that I think of it I will check them again.....had the same problem when I forgot to install the diffusers. Thanks Trochoid.....I might as well have the injectors cleaned while I have them out and check the pulsation damper as well.
More wonderful news is my ignitors are also dead!!!!! AAAHHHHH one thing after the next...thinking of using T.G.Farrell's TFIDFIS once I have this leak issue under control... Thanks guys I will keep you posted
More wonderful news is my ignitors are also dead!!!!! AAAHHHHH one thing after the next...thinking of using T.G.Farrell's TFIDFIS once I have this leak issue under control... Thanks guys I will keep you posted
Trending Topics
#9
Have RX-7, will restore
iTrader: (91)
if you are consiering having the injectors seviced, www.witchhunter.com is an excellent place and the turn around time is usually less than a week. if i were to send my injectors there on monday, i'd usually have them by saturday. great service and fair pricing.
#10
Rooster
Thread Starter
Join Date: Nov 2010
Location: Tacoma, WA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the site Mazdaverx, boxed the injectors and sent them out this morning.....hopefully shouldn't take them too long since they are only 70 miles away......
I checked the pulsation damper and no leak.....I am inclined to agree that it may be the injectors...We shall see. In the mean time I started putting together and wiring up the TFIDFIS last night. keep your fingers crossed.
I checked the pulsation damper and no leak.....I am inclined to agree that it may be the injectors...We shall see. In the mean time I started putting together and wiring up the TFIDFIS last night. keep your fingers crossed.
#15
Rooster
Thread Starter
Join Date: Nov 2010
Location: Tacoma, WA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
well mazdaverx713b Its like a christmas miracle...I sent off the injectors off to those guys (with a little extra cash to speed the process) and they finishedWELL ahead of what I anticipated.......Almost donr wiring up the TFIDFIS o you know what I had to do to find a place to mount this damn thing??? lol....Any who I will let y'all know soon.....cross your fingers
#17
Rooster
Thread Starter
Join Date: Nov 2010
Location: Tacoma, WA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
yeah back in a hurry is an understatement...I was hoping to have the TFIDFIS all wired up and what do you know.....Just after mounting them the mail arrived with the injectors.....I am super excited to fire this baby up........Lets hope "Misery" starts working again