RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Full complete 85 12A and trans coming Thursday, if you need ... (https://www.rx7club.com/1st-generation-specific-1979-1985-18/full-complete-85-12a-trans-coming-thursday-if-you-need-93009/)

MIKE-P-28 07-01-02 06:48 PM

Full complete 85 12A and trans coming Thursday, if you need ...
 
If you guys need anything better let me know, Im gonna start parting it out, its complete from carb to oil pan... It was a SLIGHT smoker on start up and hard throttle, has compression and runs. Probally a victim of rotor oil rings :)

MIKE-P-28 07-01-02 07:50 PM

You guys wanting carbs and dizzy's with igniters , its got them :)

RotorMotorDriver 07-01-02 09:19 PM

I want a spare set of pulleys to paint while I use mine :). But unless you want to send them to me for free, dont worry about it :).

~T.J.

MIKE-P-28 07-01-02 09:49 PM


Originally posted by RotorMotorDriver
I want a spare set of pulleys to paint while I use mine :). But unless you want to send them to me for free, dont worry about it :).

~T.J.


LOL let me get right on that for ya :D

Directfreak 07-01-02 09:51 PM

I want the Dual Overhead Cam.

MIKE-P-28 07-01-02 09:55 PM


Originally posted by Directfreak
I want the Dual Overhead Cam.
This is the SOHC model... :)

Directfreak 07-01-02 09:56 PM


Originally posted by MIKE-P-28


This is the SOHC model... :)

DAMN!!! I really Needed it for my VTEC 13B setup.

Wattz 07-01-02 10:09 PM

I want the carb and the metal thing that sticks off the air filter... The tube ... thing.

Yeah.

RotorMotorDriver 07-01-02 11:55 PM

Are the piston rings any good? I think I may need some new ones...:D

~T.J.

PS - On a serious note, do you happen to have the part of the crossmember thats bolted to the tranny? Apparently I need one...

MIKE-P-28 07-02-02 07:24 AM


Originally posted by Wattz
I want the carb and the metal thing that sticks off the air filter... The tube ... thing.

Yeah.

I got 2 carbs, one from an 83 and one from this 85 motor... I dont know what tube thing you mean ?

I'll take pics on thursday when I get it. And let me know what you need :)

MIKE-P-28 07-02-02 07:28 AM


Originally posted by RotorMotorDriver
Are the piston rings any good? I think I may need some new ones...:D

~T.J.

PS - On a serious note, do you happen to have the part of the crossmember thats bolted to the tranny? Apparently I need one...

That should be on there, this guy is going to a v8. :) We;ll see on thursday,I did this before hand to see who needs what and get their names on it up front :D

damon 07-02-02 12:25 PM

how much for the engine (dont need carb , dizzy , pulleys , or any of the other bolt on stuff) plus shipping to Valdosta , GA 31603

peace

MIKE-P-28 07-02-02 10:02 PM


Originally posted by damon
how much for the engine (dont need carb , dizzy , pulleys , or any of the other bolt on stuff) plus shipping to Valdosta , GA 31603

peace

The raw block I let go for $125 + shipping. Check www.con-way.com for the prices on shipping... Like I said it does smoke, but probally has NICE internals...

Im shipping from 47713

Here ya go :) Freight Collect...

Total Net charge (US Funds) $145.44
Effective Shipment Date: 7/2/2002
Rate Quote as of 7/2/2002 11:05 PM Eastern Time

MIKE-P-28 07-04-02 10:43 AM

Heres some pics :)

MIKE-P-28 07-04-02 10:44 AM

Yet another pics guys, its complete too , see the starter :)

Maguire 07-04-02 01:54 PM

How much do you want for the fuel tank sending unit? And the driver side door handle and window rolling mech.?

MIKE-P-28 07-04-02 04:02 PM


Originally posted by Maguire
How much do you want for the fuel tank sending unit? And the driver side door handle and window rolling mech.?
This is only the motor and misc parts ..

On my 80, Im keeping the power windows mech.s as extras :(

Wattz 07-04-02 04:45 PM

This tube thing:

https://www.rx7club.com/forum/attach...&postid=817432

My car doesn't have one... Is that bad or does it matter at all?

And I dunno if I need the carb anymore, but mine was smoking the last time I got done hot rodding around... Might be a gasket or something. I'll check tomorrow when I don't gotta work all fuckin' day.

MIKE-P-28 07-04-02 09:56 PM

Dunno $5 plus shipping for the air horn thingy :D

Maguire 07-04-02 11:15 PM


Originally posted by MIKE-P-28


This is only the motor and misc parts ..

On my 80, Im keeping the power windows mech.s as extras :(

I see that now. I probably should of looked at the pictures, huh? Well do you have those parts to sell from anything else? Also you mentioned something about a raditor i could have. Is that still available? Also does it need to be re-cored, or is it in working condition?

jeremy 07-04-02 11:50 PM

maguire- i have a fuel sender and chrome door interior handles.

wattz- use aluminum dryer vent hose and make a cold air intake. unless your restoring.

MIKE-P-28 07-05-02 10:03 AM


Originally posted by Maguire


I see that now. I probably should of looked at the pictures, huh? Well do you have those parts to sell from anything else? Also you mentioned something about a raditor i could have. Is that still available? Also does it need to be re-cored, or is it in working condition?

The 85 radiator is in working condition, IE did not leak in Sept. It has a bracket off it, but still bolts up and holds.. You welcome to it, or im tossing it in the garbage :(

C'mon all you guys wanting dizzys with good igniters, you guys wanting carbs , where are ya now? Its even got a good starter on it, anyone need a starter?

Anyone want a good trans for say $50?

I need the money, consider this as a donation so I can finish my car :)

Redlance 07-07-02 05:27 AM

I am very interested in the carb mail me with what you think is a fair price.
But.... I am looking at two RX's today to buy as parts cars and if one has a good carb I won't need yours. if not I could have a money order on its way on monday. if the price is reasonable.

MIKE-P-28 07-07-02 08:12 AM

I seen 1 go on Ebay yesterday for $40 + shipping. It was actually a little more than that when it closed. So I say thats a fair value. I got one from an 83 and an 85 :)

Wattz 07-07-02 04:27 PM

Mike I know what I need, I just dunno the name of it. Can you take a picture of the other side of that engine so I can point it out?

It's the thing mounted under the carb, really low. It has a tube sticking out the top at an angle. I need a new one, 'cause mine keeps smoking when I get done driving at high speeds for a while.


All times are GMT -5. The time now is 03:57 PM.


© 2024 MH Sub I, LLC dba Internet Brands