fuel pressure gauge
does anybody know who makes the gauge that paul yaw recommends?
|
Wika
|
Not to hijack, but which line do you put the fuel pressure gauge in? The return or supply? also, which one is which? 85 gsl-se.
thanks in advance. |
should be the supply line i believe
|
hmmm I would say the FEED line since the return is after the FPR
I'm not sure B/c I have an aftermarker fpr/and gauge and i got rid of the stock regulator.........and the feed line is the one closer to the engine(the inside one) Firewall |
NVM i'm pretty sure it would go in the supply(feed) line
|
if you need a good fuel pressure gauge,
either buy the one from Yaw... (it costs just as much if you buy it from an industrial parts supplier....) OR Inglese has a real nice 0-10PSI glycerin filled gauge for around $20. If you call, Ask for Dan. |
inglese?
|
|
thanks for the info guys. looks like you can buy the wika gauge direct from the company for about $21.58 I think I'm going to go that route.
|
wouldn't i need a gauge to go higher than that with the gsl-se anyway? or is it a low pressure system?
|
yeah i think the other guys think u hhave a carb
Get the one that reads 0-100 PSI |
All times are GMT -5. The time now is 10:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands