RX7Club.com - Mazda RX7 Forum - Electrical connector identification needed

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)

- - Electrical connector identification needed (https://www.rx7club.com/1st-generation-specific-1979-1985-18/electrical-connector-identification-needed-702082/)

ΝΙΚΟΣ

11-04-07 07:55 PM

Electrical connector identification needed

1 Attachment(s)

Does anybody know what are these for?it's from my 83' and i can't find anything at the manual...

Seniorchief

11-04-07 08:35 PM

I believe the long narrow one on the left is used for plugging a diagnostic tool into for reading codes. Not sure about the two white ones.

David Dewhurst

11-04-07 08:49 PM

Look at the color of the wires & then look at the different connectors wire colors in you factory workshop manual.

Box_Man

11-04-07 08:50 PM

Those are for the engine half of the stock wiring harness, I'm only using three of the wires on mine because I have a stock carb.

All times are GMT -5. The time now is 01:38 AM.