disk break conversion? a gsl into a gs?
i was wonderin what was needed we have an entire gsl but i was seein if it bolted up and what exactly you needed to take out of the gsl and put in the gs.
|
From what I have seen posted here previously, that you need the brake lines (the hard ones) as there are 2 seperate lines going back instead of the one like on the drum rear end. Also the brake master cylinder is needed off the GSL as it has less pressure going to the rear brakes. Hope this helps. As far as the rest, I THINK it is straight swap. Good luck and I am sure others will jump in as I usually forget something.
|
I swaped the gsl diff, the whole thing, and didnt change a thing. Left all the brake lines alone just hooked up the gsl line, because the two meet and connect at the same location as the drums. i now have an 81 with 83 gsl rear-end. dindnt change anything
|
you need the gsl parking brake cables, and the master cyl and p. valve. then swap in the rear diff. I did this on my girlfriend sons 85 gs(L)
|
i did the swap last weekend. direct bolt on. don't forget any of the parts they have already listed.
|
Originally Posted by BadAssRX-7
the master cyl and p. valve.
you can but not mandatory. |
All times are GMT -5. The time now is 08:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands