RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Could a rich idle cause overheating (https://www.rx7club.com/1st-generation-specific-1979-1985-18/could-rich-idle-cause-overheating-425519/)

Scourge 05-12-05 09:53 PM

Could a rich idle cause overheating
 
I've been busy with school for the last little while. So I haven't had much time to spend with the 7.

I've been chasing a few bugs. With the upcoming Calgary meet she has to be on her best behavior. So I've been working on her.

1) I've been having problems keeping it cool. Temps like to rise when sitting in traffic.

2) It's been idleing like crap.

Anyhoo...today I had some time, adjusted the carb. I needed to lean out the idle alot. Now it idles perfect (engine is still fresh about 15000 KM on a rebuild). It also appears that my overheating problem has gone away. I went for a good long drive some highway, and some in the city during rush hour traffic. The temp guage didn't get above half way.

I'm going to replace the thermostat regardless, as I had it out and it's not funcioning 100%.

I was just curios if the poor idle would cause the heating gremlins I've been chasing, or is it just my mind seeing a solution?

Thanks in advance

BigJim 05-12-05 10:14 PM

i think if u run rich ur car runs cooler than if you rune lean, i could have it backwqards so im absolutely no help.

Scourge 05-12-05 10:22 PM

I was curious more than anything.

Thanks for the reply. Thermostat is getting changed tomorrow, hopefully that cures it.

lovintha7 05-12-05 10:32 PM

Lean = hot, you had it right BigJim. Might wanna try an e-fan Scourge.

Rogue_Wulff 05-13-05 02:08 AM

I would be more inclined to think the poor idle was causing the temp to rise. Low engine RPM = low water pump/fan RPM. Could also be related to a fan clutch that is weak.

Scourge 05-13-05 04:41 AM

that's kinda what I was thinking rogue.

e-fan is in the plans. Thermostat should fix my problem (hopefully)

Kentetsu 05-13-05 05:54 AM

Yeah, do whatever it takes to keep that baby cool. Heat = death to a rotary in very short order.


All times are GMT -5. The time now is 12:12 AM.


© 2024 MH Sub I, LLC dba Internet Brands