RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Coolant in motor (https://www.rx7club.com/1st-generation-specific-1979-1985-18/coolant-motor-333869/)

capri93 08-01-04 04:37 PM

Coolant in motor
 
I have been working on my 81 for a few weeks now. It has alot of coolant getting into the motor which is I believe the reason it starts hard, Im hoping that its not a compression problem, because it runs smooth once i have it running and warmed up. Now I noticed that the cold start tank still contans fluid how car i tell if thew coolant in the motor is from that or from the cooling system. My uncle thinks its a bad O ring on the intake manifold.

coldy13 08-01-04 05:14 PM

It's probably a bad o-ring on the intake manifold, if it's not then it's the inner coolant seals in the motor, which means rebuild.

Brianhsval 08-01-04 05:32 PM

If it is the inner coolant seal do a search on Paul Yaw's fix. I did this the other day on my 85 SE and it worked! Saved the re-build till later. Doesn't hurt to try. Only cost about $12 and 3 1/2 hrs time.


All times are GMT -5. The time now is 12:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands