RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   conversion fb to t2 wheels? (https://www.rx7club.com/1st-generation-specific-1979-1985-18/conversion-fb-t2-wheels-623877/)

dayton 02-14-07 04:40 PM
conversion fb to t2 wheels?
 
has anyone put a set of t2 wheels on a first gen (more specific gsl-se)??? and if so what was the conversion to five lug like???

fluffysheap 02-14-07 05:01 PM
Probably better to just get aftermarket wheels since the GSL-SE has a real bolt pattern.

Since the wheel hubs are one big unit and have the brake discs and wheel bearings in them you are basically looking at a whole suspension swap to get the T2 hubs in there.

Rico Suave 02-14-07 05:23 PM
2 Attachment(s)
Originally Posted by fluffysheap
Probably better to just get aftermarket wheels since the GSL-SE has a real bolt pattern.

Since the wheel hubs are one big unit and have the brake discs and wheel bearings in them you are basically looking at a whole suspension swap to get the T2 hubs in there.
not really, get in touch with Billy from ReSpeed he sells a TT2 Big brake set up wich i have on my 85 you need to get the 2nd gen 5 lug wheel hubs, TT2 brake calipers and brake rotors. Then redrilled the rear axels to 5 lug and good 2 go.I used the 2nd gen 4 lug hubs to keep the GLS-SE lug pattern.


All times are GMT -5. The time now is 11:00 PM.


© 2024 MH Sub I, LLC dba Internet Brands