cant take the 20 year old car stuff any more...start making offers
 

alright i just cant do this any more. im only 16 and this is my daily driver and i cant afford to drive this car. the clutch just basically went out on me.. will only drive up to about 2000 RPM then just revs. plus its just to damn hot to drive...even in the morning and night.

ill find out for sure tomorrow that im gona start parting this car out thent ake whats left over to the junk yard.

i have some pretty rare things that...im hoping to get some decent cash for.

rare items.

sliding sunroof- pops up and slides all the way back. you will get the glass. and ALL hardware. plus the interior surround. (not sure if its direct bolt in. but if not you can buy my car instead :-) )
http://img.photobucket.com/albums/v2...r/cfc38470.jpg
http://img.photobucket.com/albums/v2...r/d416b5c2.jpg
rims - these are from what i here pretty rare. they are 13's and 4x110 bolt pattern. sold with tires. (in not the best but drivable condition)
http://img.photobucket.com/albums/v2...r/IMAG0115.jpg
i also have a completely taken apart short block 12a. so if you need a specific engine part. let me know. (rotor housings have flaking. everything else is great)

no interior just dash and center consol.
http://img.photobucket.com/albums/v2...r/IMAG0125.jpg
http://img.photobucket.com/albums/v2...r/IMAG0126.jpg
everything will be sold through pay pal and i need this stuff to go quick. i need as much money as possible as fast as possible so i can get another car.

once again make offers. but im finding out tomorrow about if im gona have a ride to work or not..if so ill start pulling stuff apart.

thanks

Brad

How much would you want for the complete car?

hmm, I like those rims, what kind of price you looking to get for those?

i noticed you got seats, how much?

Yeah,
How much for the seats!

sorry i 4got ti say..seats are staying with me inless the complete car is bought. sorry again.

Brad

you guys got PMs

do you still have the inside door handle for the passenger side i really need that.. kinda hard to get here in hawaii, if you give me a reasonable price and shipping dont cost too much i will buy it, lmk thanks

i sure do...but the drivers is broke...do you need the drivers. or just the passenger.

once again. ill find out tomorrow if its gona be sold..and soon after if its gona be parted or sold complete

Brad

yeah i only need the passenger side. your car looks a little different from mine.. what year is your and if you can maybe take a pic of the door handle for me thanks...

Awww man, dont part it out and send another 1st gen to its grave. :( Sell it whole man!

listen to carl. Sell it whole if you can. It's sad to see perfectly good/workable shells going off to the crusher. I realize you need the cash, but I really hope you sell the car off in one piece.

well carl i WAS gona just send you the carb...kinda a donation to do some research for boost preping. but i really DO want to sell it complete...but i can get more money by parting. and i need about $2500. by yesterday if that tells you anything.

the car is forsale...with the seats. and an extra engine for $2500.

you can come get it. or i can help you get it shipped (shipping payment will be up tot he buyer)

some days it drives good...somedays it doesnt so its possible to drive it home if you live kinda close.

Brad

Well I wish you luck, and thanks for the offer but I hope you sell it whole. Someone buy this car!

is that an 85 or 84? Is it a grey interiour? is the stereo surround broken?

its an 84. no interior. someone buy car and engine for $2500

its an 84 gs, new fuel pump, and regulator, new racing seats, no carpet. no stereo surround, rats nest revmoved. engine actually runs great now. just needs a new clutch. new brake pads up front and new shoes in the rear. coolant has be flushed and re filled., new plugs, wires, cap, battery, gas tanks has been droped and cleaned up and flushed out.

someone has to be wanting this.

i really do want someone to buy this from me for $2500. with the extra engine.

but after a little while i will start parting it out. so someone please help me out. i gota get a car to get to work and back ASAP (iv already missed two days of work so PLEASE help me)

thanks

Brad

Why not just put a clutch in it. A couple hours and you wont have to miss work anymore.

i feel your pain...im thinking about the posibility of selling mine...but mine needs more than a clutch....multiple phantom problems suck....

yeah so i fix the clutch..then something else brakes...its not he problem im having NOW..its the ones i know im gona run into.

im just gona get something thats more like an 94 instead of a 84. ya know.

thanks

Brad

The problem is a 94 is ready to start the "Break" cycle where with your 84 you have almost finished replacing everything. Also look at it this way. You insurance is cheeper with an 84 and you can repair it with with the money you are not using for payments.

i just want to get out of it. i want something that i dont have to worry about braking down everything i hear a new noise. and i need somehting that i can drive to work and not show up sweeting head to toe.

so someone please buy this.. NOW!!!!

thanks

Brad

I think what rx7anator is dealing with is not a question of what's cheapest in the long run but what's going to resolve his problems right now.

excatly. we (my family) are kinda short on money at the sec.. my dad is buying a business and starting another one up at the same time..and he has a HUGE loan out. there for he cant get a loan out for me to buy a car.(which i will pay for..i am NOT spoiled) so i need something that can take my ass to work everyday with no problem..and doesnt need loads of money everyweek when i get my paycheck.

but when his buisnesses actually get going and producing money again ...ill be back with a FD..:-)

so once again..im in need of help and this car has some rare items..so someone take it off my hands...PLEASE

Brad

keep in mind man every vehicle breaks down and needs things replaced but a rotary is less likly to have problems if it is maintained properly. Just keep in mind a rotary engine has what 3 moving parts or something while a piston engine has hundreds?