bend your own exhast pipes?
 

was bored looking around ebay and came across some stuff like this.

http://cgi.ebay.com/ws/eBayISAPI.dll...category=50893

now i know its not a mandrel bender.. but how do you think the pipes come out?

*yes im aware of the pics... and aim aware this one is only a 2" bender... there are some that are 3" benders on ebay this one just had a good pic*

ive had many exaust systems made with this type of bender, it doesn't have the "acordian crushed" inside of the bend, they do perform ok. Not as well as a Mandrel but... still pretty good.


just like in this picture :cool:

It's great for roll cages.

hmmm i might have to purchase one like this.

The info I got on these is that they are great for pipe, but they wont bend tubing correctly. The mandrels are sized for iron pipe and will not work on tubing you would use on rollcages or exhaust systems.

I dunno. The Ad states:

Yea but the description says
"Hydraulic Pipe Bender not tube bender (used)"

Tube is measured by the OD and Pipe is not. It will not work for cages.

This will explain:

http://www.jgbraun.com/subpages/pipevstube.htm

-billy

How dare you doubt me Alex. ;)

http://www.eng-tips.com/gviewthread..../404/qid/53665

my friend has one thats the same design as that. it works decent, but will crush thinner stuff. we did a friend's celica's exhaust with it and it turned out pretty good. it really depends on the pipe you use

What pipe did you use? Dia? wall thickness?

I have a similar one and bend great roll cages as long as you use schedule 40 black iron pipe the shoes dont work well on exaust or dom tube unless you dont care if it looks funny -crushed

i dont remember, ill ask him and see if he remembers

sch40 pipe is not suitable for rollbars/cages unless its for cosmetic purposes only.

Just curious to know onepointone, thanks in advance.

I use it on all my cages and have cartwheeled a time or 2 and it works great maybe you cant for auto x but tough truck racing its fine

Really? thats legal? The SCCA wont even accept ERW anymore. Must be DOM only. AFAIK, NASCAR is similar.

i dont know about roll bars, just exhaust that we did that one time. i dont think i would trust my welding to hold up if i flipped the car :p:

You could always spend a fortune and get an english wheel.

i picked that ebay one bacuase it had a pic of a pipe bent with the product.

here is another one
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2453560720

this one say tube. up to 3"

Neither will work. You need to read the link I posted above and this one:
http://www.lowbucktools.com/benders.html

The bender itself is not the problem it is the dies that come with it. You will only get "pipe" dies. "pipe" dies will not work with "tube" used for cages or exhaust.

These would work:

http://cgi.ebay.com/ws/eBayISAPI.dll...3&category=633

http://cgi.ebay.com/ws/eBayISAPI.dll...category=42147


-billy

ahhhh gotcha... thanks.

tubing bender cost more hmmmm would be a worth wile investment if i would use it more thant twice i assume.

i have one one of those it definetly won't bend exhaust pipe, or anything with a thin wall, 1/8" is about as low as it goes