Been working on my racer
 

I have been working on my RX 7. I fabricated a front and rear spoiler and I fabricated and intake manifold for my Weber 44DIF and a stainless header and 3" exhaust pipe.

Looks like an interesting project. What suspension and brakes?

sweet fab work looks like birds will get diced

It has Ground control system and Tokico shocks, struts, springs and sway bars. The brakes have stock rotors with Hank black pads.

I see that you are keeping the modifications within the ITA/IT7 rules! Race car looks great!

Thanks. I race the car under NCRC. They have track day events and also a race division. I am 65 and it is fun just to design parts and then see if they work like I thought they would. If not see if I can figure out how to make them better. I finished the front airdam and splitter and attached this photo. I plan to race the car in the NCRC event at Thunderhill raceway in Willows California a 3.1 mile track. I ran the car there 2011 and 12 didn't race it 2013 using the time to build it up to go a lot faster.