RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Anyone know a good match paint for faded brown interior pieces? (https://www.rx7club.com/1st-generation-specific-1979-1985-18/anyone-know-good-match-paint-faded-brown-interior-pieces-692856/)

mikewoodkozar 09-29-07 09:59 PM

Anyone know a good match paint for faded brown interior pieces?
 
I know i have asked this before and i didnt really get much of a reply.

I tried using Krylon Fusion brown and it looks okay, but it is not very close (too light).

So, again, does anyone know a good matching paint for the 84-85 brown interior option?

This is to be applied to the rear plastic trim found in the hatch are; like the speaker covers and such...

Please help, i know someone has had some luck right?

Oh and FWIW i do not want to sand down or steel wool down the parts, nor did i have any luck with the heat gun method (heat gun worked, but left everything patchy and non uniform).

dominicaneddy 09-29-07 11:40 PM

I went to both auto parts store and home depot with a piece that I was trying to match but successfully found paint at home dpot (plasticpaint) for like outdoor furniture that can withstand the suns temp.

Jeff20B 09-30-07 12:19 AM

Look for vicoona or vaikuna (not sure on the spelling). It's a shade of brown for clothing.

trochoid 09-30-07 02:02 AM

Pick up an SEM color chart. Iirc, there is a brown there that matches.

Directfreak 09-30-07 02:46 AM

Also, search the 1st gen section under RX7Doctor. He did a brown/tan color update that looked absolutely awesome.

He could probably tell you how it's been holding up as well.

dellemannia 10-01-07 11:20 AM

SEM 17223 very dark pewter is what I use on my two GSLSE`s.........

kleinke 10-01-07 02:10 PM

Close is no good. You expend the cost of paint and your considerable Effort in prep and painting only to achieve results that will be sub-par.

Take a plastic part to a paint vendor. They can mix an exact match of SEM or equivalent plastic paint and put it a spraycan. Most of the plastic and vinyl paint and dye manufacturers will also match for you the exact color at small cost, if you send a sample part. Do it right.

dellemannia 10-01-07 03:16 PM

SEM 17223 very dark pewter is what I use on my two GSLSE`s.........

I sprayed this color on the inside unfaded portion of a piece. Let it dry.....it might not have been an exact match but I had a very very hard time finding the sprayed portion. But then again I am over 50 years of age and do not have perfect vision.

Clearkut 10-02-07 03:56 PM

I found a black that matched the guage surround and other black plastics and went 2-tone where ever it was fading , IMO it looks much better than the stock I think I have a pick in my garage section


All times are GMT -5. The time now is 04:57 PM.


© 2024 MH Sub I, LLC dba Internet Brands