Anyone ever seen these wheels on a RX7?
http://www.good-win-racing.com/Mazda...ml?id=92QdW7yR
Trying to find some alternative for the 4x110(I know...good luck right?)Wish I could see these wheels(or similar)on a 7. I still want the ROH snypers though :wallbash: |
I've never seen those wheels on an FB, but I have dealt with Goodwin Racing with nothing but good results. They've got a great rep with the Miata guys. :)
|
Originally Posted by Natey
I've never seen those wheels on an FB, but I have dealt with Goodwin Racing with nothing but good results. They've got a great rep with the Miata guys. :)
|
Ive seen these wheels i ngold on a 7...they look DAMN GOOD!
|
I know the owner of the company who makes them personally.
IF you want info about a specific size, let me know. Neal |
Originally Posted by Speedworks
I know the owner of the company who makes them personally.
IF you want info about a specific size, let me know. Neal |
i can't photo chop, but im sure someone on here can.
just get some good pics of your car, and ask someone to chop those on there for ya |
4 Attachment(s)
I just posted that link 2 days ago and you're questioning me? How disrespectful. Hasn't anyone told you to respect your elders and the knowledge they bestow upon you? The pix are Moremazda's car...
|
teh sexy. +1 for a good company to buy from. Got my dad a set of wheels for his miata from them.
|
Originally Posted by Hyper4mance2k
I just posted that link 2 days ago and you're questioning me? How disrespectful. Hasn't anyone told you to respect your elders and the knowledge they bestow upon you? The pix are Moremazda's car...
Huh? I'm trying to stay optomistic here but are you mad about something, are you directing this to me? I don't understand...especially about the elder thing(if directed to me). I'm almost 40, I'm no youngin' And what link are you referring? Thanks |
Originally Posted by Bigmotoxer
Huh? I'm trying to stay optomistic here but are you mad about something, are you directing this to me? I don't understand...especially about the elder thing(if directed to me). I'm almost 40, I'm no youngin'
And what link are you referring? Thanks dont worry about him. hes just messing with you. everyone knows Hyper4mance2k is a pansy anyways ;)jk :ky: |
Originally Posted by aws140
dont worry about him. hes just messing with you. everyone knows Hyper4mance2k is a pansy anyways ;)jk
:ky: |
Judging by the pics that Hyper4mance2k posted, they look a hell of a lot better than I originally thought.
|
Originally Posted by Hyper4mance2k
I just posted that link 2 days ago and you're questioning me? How disrespectful. Hasn't anyone told you to respect your elders and the knowledge they bestow upon you? The pix are Moremazda's car...
For what it's worth brother thanks for the pics...those look like 16" but are they really 15" Thanks again... |
Hyper4mance2k is a good guy. i was just messing with him.
id say those wheels have to be bigger than 15. they look bigger than the 16's i have even, but it could just be the drop of the car. |
ya, these wheels are great, and i've seen them on a 1st gen. Realy nice with the car. I think the guy who has them on his car on here, his username is liek notveryhappyjack or something i think
|
Goodwin racing also sells (last I knew, 2 weeks ago) Konig rewings in silver or graphite, for the 4 x 110 pattern. Those look HOT on a 1st gen........
|
Originally Posted by Rogue_Wulff
Goodwin racing also sells (last I knew, 2 weeks ago) Konig rewings in silver or graphite, for the 4 x 110 pattern. Those look HOT on a 1st gen........
ROH can kiss my ass!sonsabichis :p: just jokin', I think I'll be totally happy w/these, I've only seen them(in Graphite)on one car and it was waayy dropped and I don't believe it had 20mm offset so I'm dying to see them on a 7. Later guys |
MAybe good to know. These wheels are being made by a UK company called Rimstock. One of the owners is Mat Neil, former Britisch Touring car Champion.
These wheels were initially developped to be put on ALL BTCS cars as standard. Out of this development these wheels were created, mostly for light weight, race applications. |
No problem. Just for future reference, I may be replacing my springs soon. I have an older set of lowering springs, that are starting to sag a bit. This is having adverse effects on the autox course, but it LOOKS hot sitting this low. I have 15x7 +15 offset Ronals.
I would make someone a killer deal on the old springs, if they wanted their car slammed, and maximum handling wasn't needed. The only real issue having the car this low, is it can effect turnin for the real tight, hard braking corners. I could use the lower control arm spacers to solve this, but they are not allowed in the class I run. I don't have enough engine to compete in the class those spacers would bump me into. |
Originally Posted by Speedworks
MAybe good to know. These wheels are being made by a UK company called Rimstock. One of the owners is Mat Neil, former Britisch Touring car Champion.
These wheels were initially developped to be put on ALL BTCS cars as standard. Out of this development these wheels were created, mostly for light weight, race applications. |
Originally Posted by Rogue_Wulff
No problem. Just for future reference, I may be replacing my springs soon. I have an older set of lowering springs, that are starting to sag a bit. This is having adverse effects on the autox course, but it LOOKS hot sitting this low. I have 15x7 +15 offset Ronals.
I would make someone a killer deal on the old springs, if they wanted their car slammed, and maximum handling wasn't needed. The only real issue having the car this low, is it can effect turnin for the real tight, hard braking corners. I could use the lower control arm spacers to solve this, but they are not allowed in the class I run. I don't have enough engine to compete in the class those spacers would bump me into. yep I just ordered ST springs too. I'm not sure if I'm gonna go w/195/50-15 or 205/50-15, don't want any rubbing...Does anyone have any suggestions? I search it and see what peeps have had to say about it. Thanks again. |
they look rather good :) these seem to be pretty popular in australia if you can fit them http://www.simmonswheel.com.au/images/fr19sml.jpg
|
I have 205/50-15's. No rubbing issues. My wheels have 5mm less offset, which put the outside edge 5mm further out. Even with my car sitting at least one inch lower in the front than the ST springs will give, I have lots of room. My front fender lips have been lightly rolled.
Onlyonthursday, another forum member, just bought those same wheels, and said he ordered 205/50-15's. Hopefully, he can a definitive answer about the clearance of this combo. I think he also has ST springs. |
Originally Posted by Rogue_Wulff
I have 205/50-15's. No rubbing issues. My wheels have 5mm less offset, which put the outside edge 5mm further out. Even with my car sitting at least one inch lower in the front than the ST springs will give, I have lots of room. My front fender lips have been lightly rolled.
Onlyonthursday, another forum member, just bought those same wheels, and said he ordered 205/50-15's. Hopefully, he can a definitive answer about the clearance of this combo. I think he also has ST springs. Ok cool, I want the 205/50's so I will order them. And I've thought of rolling my fenders if I need to but hopefully I won't becuse I don't know anyone w/the $300 tool and I don't want to use a hammer,lol... thanks I think I'll be good. And Matt, that is the type wheel I like w/5 spokes/star type but noone has them for a 4x110 bolt pattern, but thanks guys. |
Originally Posted by Hyper4mance2k
I just posted that link 2 days ago and you're questioning me? How disrespectful. Hasn't anyone told you to respect your elders and the knowledge they bestow upon you? The pix are Moremazda's car...
At any rate, I have 2 sets of these -- one in "Hi-power Silver", which is a very nice finish -- and one set in black for my race rubber. That brake dust from the race pads sticks to the wheels. I have 35mm offset, and am running 205/50-15 in front and 225/50-15 rear with no issues. You can order these wheels through your local Discount Tire and get the same pricing. |
i have those team dynamics on my car. took 7 months to get them too. id like to say i was one of the first to have them.
http://i39.photobucket.com/albums/e1...2-5222_IMG.jpg i never get tired of showing off my wheels. and yes 5 lug front, 4 lug rear. |
2 Attachment(s)
Originally Posted by Bigmotoxer
Ok cool, I want the 205/50's so I will order them. And I've thought of rolling my fenders if I need to but hopefully I won't becuse I don't know anyone w/the $300 tool and I don't want to use a hammer,lol... thanks I think I'll be good.
And Matt, that is the type wheel I like w/5 spokes/star type but noone has them for a 4x110 bolt pattern, but thanks guys. 5 spoke/star design, you say? Like this? https://www.rx7club.com/attachment.p...d=225047&stc=1 https://www.rx7club.com/attachment.p...d=225048&stc=1 |
HA HA HA This thread blew up. Yea man I was just messin with you. Kinda hard to express sarcasim through a keyboard. And you're right about the meds, as I am all out of beer and too lazy to go get more. I do think that Moremazda is running 16 or 17's, but it's the same basic idea.
|
Originally Posted by Hyper4mance2k
HA HA HA This thread blew up. Yea man I was just messin with you. Kinda hard to express sarcasim through a keyboard. And you're right about the meds, as I am all out of beer and too lazy to go get more. I do think that Moremazda is running 16 or 17's, but it's the same basic idea.
It took me a minute to realize that you were messin' w/me, I thought you were trippin', lol It's all good brother and yeah they look good e en for 16" 0r 17" Thanks guys And yeah I like the black 5 stars on that red-ride, that's my style :) |
Originally Posted by Bigmotoxer
Thanks brother. I just bought the Konig Rewinds Graphite 15x7 4x110 about 30 minutes ago...shipping out Monday.
ROH can kiss my ass!sonsabichis :p: just jokin', I think I'll be totally happy w/these, I've only seen them(in Graphite)on one car and it was waayy dropped and I don't believe it had 20mm offset so I'm dying to see them on a 7. Later guys |
Originally Posted by Bigmotoxer
Thanks guys
And yeah I like the black 5 stars on that red-ride, that's my style :) |
Originally Posted by FIBREMAZ
Can you possibly let me know how much clearance there is between your caliper and the wheel when you have them on the car? i'm considering selling my 17"s and getting some 15" rewinds but i am concerned about caliper clearance with FD brake setup
It'll be a few weeks before my projects done but I will slide a wheel on and see what the clearance is w/stock set-up when the wheels come in, should be around thursday. PM me thurs-fri and I'll tell you...i just don't have the wheels yet. |
All times are GMT -5. The time now is 08:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands