another newbie
 

hi there my name is eric and in just a couple weeks i should be picking up a 1979 rx-7 with a 13b bridgeport rotary. i real good friend of mine just doesnt have the time or patience to work on it anymore so i will be getting it for next to nothing. at the moment he says there is an electical problem cause it doesnt run right or at all. i will be looking for help when i get this ride in my garage since i dont really know how to work on a rotary but will learn as much as i can or get profesisional help if needed.

Welcome to the forum!

Sounds like you are getting a good deal. Hopefully your electrical problem is a simple one. Remember to use the search page as well as the FAQ page before posting questions on the main page. (Just trying to save you from getting completley owned by some of the other members on here). That being said, everyone on here is really helpful. Good luck!

holly, isnt there stricted emission laws in ontario. casue here in BC it is hard to make any power without it failing. i want to street port mine out wheni rebuild it but with emissions i dout i will

Hey this is Dymo, its still sounds like your getting an excellent deal. Im the do it your-selfer just because i don't have a boat load of money. I came a cross a rare 84 FB Rx that had the engine completely ripped out of it. it laid to rest for 5 years untill i got a hold of it. Now i bought me another rx, and 85 for the engine and any other parts that i can use, and things are going well. The car is almost ready to receive the new engine with a custom porting job, new performance 'del-orto' carb, and headers. Its going to be a hell of a ride. The key point to you don't give up on it, you can have a rare beauty like me if you hold faithful to your rx. Good luck with it, and if you need a little help, or advice, post up a message. Later!