RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Air Control Valve Gasket? (https://www.rx7club.com/1st-generation-specific-1979-1985-18/air-control-valve-gasket-499809/)

gsterror 01-15-06 08:11 PM

Air Control Valve Gasket?
 
I was just wondering if there's ANY place I could buy the gasket to the Air Control Valve?

I removed my emissions according to the writeup, but when I just use a blocking plate, air seems to get through (naturally).

I figure if I can just use the stock Air Control Valve gasket it'll stop the air from flowing through. BUT, I cannot seem to find this ANYWHERE.
Anyone know a way to help me out.

j9fd3s 01-15-06 08:40 PM

the 12a gasket is no longer available, you just need to use silicon, or make one.

64mgb 01-15-06 08:40 PM

Make one. You can buy gasket material from you local auto parts store and cut it to the shape you need.

Rich

cdrad51 01-15-06 09:21 PM

mazdatrix.com. They used to have it at least. Give it a try.

Rx7carl 01-15-06 10:30 PM

I may have a new ACV gasket you can have. They come with engine rebuild kits and I never throw anything away LOL. I'll have a look tomorrow if I have a chance before work.

jfachner72 01-16-06 09:20 AM

I used Black Silicon Gasket Maker...

Squeezed a lot out and spread it about 1/4 inch thick over the entire plate that i made and bolted it down tight...

Workd great..... I think

Jay
1984 FB

nosferatu595 01-21-06 12:19 PM

DO you still need this? I have plenty of them. Let me know and I will drop you one in the mail noseratu595@yahoo.com

gsterror 01-21-06 11:18 PM

Yeah, I could still use one, Carl or Nosferatu.

nosferatu595 01-22-06 08:53 AM

Send me an email to nosferatu595@yahoo.com and let me know if you have A, B, or C. Also give me the mailing address. I can get to yahoo email from work and I will get you one in the mail tomorrow.

http://i15.photobucket.com/albums/a3...atu595/acv.jpg

gsterror 09-12-06 10:13 AM

HOLY SHIT, this is old.
I still need this, type A, if you're all still selling them. Need it for a friend.

IanS 09-12-06 02:02 PM

Its really easy to make one if you buy the roll of gasket material from auto zone, etc. Its only like 6 bucks I think (its been a while) and there is quite a bit of it in the roll.

gsterror 09-12-06 02:29 PM

Okay, thanks. I'll do that then.

IanS 09-12-06 02:39 PM

it is also good when you end up taking your intake manifold off and then realize that it is a special order part. You can just make one as a temporary and then when the actual gasket comes ion, you can change it over real quick.

gsterror 09-13-06 04:40 PM

Yeah, I know a guy that had that problem :P


All times are GMT -5. The time now is 02:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands