Affordable ITB's
 

I'm not sure if this has been posted before, but I was browsing the net and I found this site that among many other products, has Weber IDA-style individual throttle bodies. Everything but drilled injector bosses and fuel lines are included, and they are actually just a few dollars more than an a Weber 48 and considerably cheaper than the 51.

http://www.extrudabody.biz/servlet/t...dsh-IDF/Detail

I was planning on doing a ida intake and carb on my car, but this seems like it wouldn't be too much more expensive (going the megasquirt route anyways) and probably produce more power and better drivability than a carb could. :dunno:

So figure $545 for the throttle body, $400 or thereabouts for megasquirt, another few $$$ for some good injectors and $250 (or less if used) for an ida intake. Not a bad deal, IMO. Grassroots motorsports got 25 more RWHP just dyno-tuning the factory intake assembly with megasquirt, I can see this picking up 10-20 more over that.

Just for reference, the Fuji racing kit is $1500 with no engine management. So basically twice the price although it is much more complete.

the TWM or reline TB's are about that much too

very interesting looking. I would love some more details on this.

For your info, the fuji racing that you say cost 1500$ that includes an intake manifold in there also for that price if you haven't noticed, the actual kit is only 785$ for a 47mm and 950$ for a 50mm. Link is here:

http://www.fuji-racing.com/fujiracing_009.htm

tweakit.com has the BAller$$ stuff.

Plus i dont think anyone with a rotary wants ITB with only one injector per rotor.

Thats why tweakit has the right ones.

I personally run the Fuji one with only two injecters, also not everyone wants to run an IDA style, raiment people want the added low end torque of the dcoe style

Who's making ITB's nowadays for the 12A? Tweakit's site has been down for a while and Fuji is out of business.

thewird

I found a post somewhere that said that Tweakit.net shut down this year...so much for a site that I used to drool over :( Anyway the ITB's that were sold through tweakit are made through www.efihardware.com they don't seem to have the manifold you would need nor do they have the nice airbox that Tweakit used to sell. Kinda glad I picked all that stuff up before tweakit went under, however at least the throttle body manufacturer is still around....

Still seems expensive although it is pretty. The Fuji one was just perfect.

I remember someone saying there was a guy in the states that sells microtechs and ITB's for affordable price but I never paid attention since I didn't need it but now I'm looking for it LOL.

thewird

Thankfully when I was in the market for this stuff the Australian dollar was down so I was able to get everything at a 25% discount ;)

My plan is more simple:

RB Holley manifold
Old 750cfm Holley (3310 code, AKA "the genericest 4160") which is 42mm * 4, modified with a dab of weld to be mechanical/1:1 operation
Standoff injectors mounted in the carb hat, maybe. Still thinking about it. I'd LIKE to route the injectors through the boosters, but that seems like a lot of work for unknown gain.

I paid something like $120 for the manifold, and had the carb as a leftover from my big-block Ford days. The carb was the best running Holley that I'd ever experienced, so i feel bad turning it into a throttle body, but, well, I'm probably never going back to carburetion ever, so it's do this or nothing. If i ever do go back to BBFs, I'll be using injection on that too...

Innovate sells a TPS kit for $69, I think I can do it cheaper.

i was planning on using a ford 351 throttle body and converting it to have injector bungs and rails, they are pretty close to 50mm too.

I love your ideas. That has to be one of the more interesting ones I have heard on how to convert to FI. I hope you will post some pictures of this mechanical masterpiece.

im planning on doin a poor mans EFI ITB setup on my next build (cuz im poor and have pleanty of parts) im goin to strip one of my dcoe's, adapt a TPS to the shaft, and weld in injector bungs in the manifold for a pair of ID1000's or similar and use a spare FC primary fuel rail

What about converting a Nikki to a TB? Would be an interesting project.

No point - the Nikki is horribly, horribly small.

If you think about it, the way the manifold are set up, it's already ITB.