88 13b into 85 GS
Correct me if im wrong, and most likely i will be..
To do the following swap 13b into a 85. I need the following. 12a front cover 12a oil pan 13b But, I want to carb the 13b, What all do i need for that? I dont want to use a nikki, id rather have a eaiser,nicer setup.. thanks -HellBent Oh, and if you want to be a smart ass, and post links. please by all mean go ahead. |
To have the 13b drop directly into the engine bay without any custom work, you will need the gsl-se oil pan and I do believe a 12a front cover is fine (if you plan on blocking the OMP and run premix). If you go on racingbeat.com, they have the kit that blocks the injector holes and allows you to run a carb. Also on that site, they have pretty good carb kits. Good luck!
|
If you want to maintain the stock MOP system, you must use the SE 13B front cover. Why would you think a 12A oil pan would fit a 13B?
|
You must use a GSL-SE oil pan, the 12a will not fit. For mounting you will either need a GSL-SE front crossmember or the mounting bracket from www.racingbeat.com.
There are many intake setups available for 13b's. Usually you need the following: Carb Intake Filter Linkage Low pressure fuel pump Fuel pressure regulator Block off oil metering pump Block off ACV if using factory lower intake manifold There are many websites that sell complete kits. If you need more info try the search button. www.mazdatrix.com www.racingbeat.com www.rotaryshack.com |
XLR8 Thanks Trochiod.
|
i have an extra mounting bracket for the 12a to 13b swap i ordered one the charged me for two and sent two if you want it just pm me
|
Atkins also sells FI plug kit.
|
All times are GMT -5. The time now is 01:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands