83 rx7 clutch help
 

im new to the site and did a lot of searching regarding this topic. i recently bought a new xtd stage2 clutch kit to change out my old clutch. i unbolted the driveshaft from the differential and the transmission from the block. i am stuck on trying to get the shifter out because i cant get the center console out. any help, pictures, diagrams, or suggestions would be greatly appreciated. thanks

take the shifter handle off uncrew it like any old thread. Take the plastic shroud off it.
Should pop out with a screw driver"flathead". then take the three 10mm bolts off that hold the shifter in and your good to go..

Welcome to the forum.
You do not need to remove the center console to remove the shifter. You remove the shifter knob, then the shifter trim. Underneath that you will find the rubber boots that seal the shifter area. Pull up on those until you expose the top of the shifter tower. You will see 3 bolts. You need a 10mm socket to remove them.
Pull the shifter straight up and then you can safely lower your trans.

Welcome to the forum and the Darkside.

For you reading and educational pleasure, in my sig line is a link to the online FSMs, carb manual, etc.

he just copyed me and put it in english haha :buttslay:

Lol.
Actually you out typed me, must be the Arthritis:lol:

thanks for the help guys. i'm gonna try to get it done today and see how it goes

^ I was going to direct you to my thread on tips on putting the trans back in.

today, i took off the 3 bolts but couldnt take out the shifter. is there any special technique for me to pull it out? i'm stuck on this and might also need some advice on getting the trans off so any info would be greatly appreciated. thanks

thats strange it should just pop out... try pullin a bit

i'll give it another try and let you guys know how it goes. thanks

yes the first time u pull it out u REALLY gotta pull i thought i missed something the fisrt time i did it also but it was just really tight.....after u feel it POP out itll move really loose u can just leave it there and drop the trans....but remember when u put the trans back on to have someone line the shifter up or it might go off to the side.