RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   '83 Rear calipers (https://www.rx7club.com/1st-generation-specific-1979-1985-18/83-rear-calipers-972055/)

-Gamah 10-04-11 04:22 PM

'83 Rear calipers
 
I don't want to mess up and get the wrong parts. I have a lsd/disc rear end coming my way that has seized calipers, looking to replace them as cheap as possible. Didn't see any for sale in the f/s sections so I went browsing online and came up with this:

http://www.discountautoparts.com/ite...=262083&mfr=A1 CARDONE&weight=8

That looks like a complete kit to me, I need 1 left and 1 right, is that correct? Can I find these any cheaper?

j9fd3s 10-04-11 06:37 PM

yeah that should be all you need, $56 each is a good price too. keep looking maybe you find it cheaper...

cshaw07 10-05-11 11:19 AM

i rebuilt mine, cost me $9.99 per side and took about a half hour each. I painted em whilst all apart too

-Gamah 10-05-11 01:58 PM

I was told they're completely seized to the disc. The axle has been sitting outside for some time. Maybe I'll try a rebuild kit first.

john smack 10-05-11 02:34 PM

the axle has only been sitting out from under the car for a couple weeks, the calipers are not siezed to the rotors the piston just seems siezed, there is no pads in the calipers as I had to remove them to be able to roll the car after I took the motor out. They should be able to be rebuilt.

-Gamah 10-05-11 06:38 PM

Well then my mistake on misunderstanding you, I'll order rebuild kits. John, do you have a PRO# for the shipment?


All times are GMT -5. The time now is 06:38 AM.


© 2024 MH Sub I, LLC dba Internet Brands