82 12A wont hook up to 80 5spd Tranny
...read through the forum and this hook up should work. I have the tranny and the motor out ...it seems almost like the spleen/shaft out of the bell housing is too long for the 12A??...I have about 1/2 '' space before the bell housing surface meets the block...any ideas..it wont budge!!!
|
Check the pilot bearing in the flywheel. It may be damaged, or the clutch disc has slipped and you need the alignment tool.
|
The alignment tool (or something like it, like a spare input shaft) is a must-have; trying to get things to mate up without it can drive you insane.
It's one of those simple, use it for 30-seconds tools that are just about indespensible. |
wow...thanks guys. I did use the alignment tool, then torqued as per specs. But
I did take a second look and it was off!!...ever so slightly but enough to make me want to shoot the thing....man that was driving me insane!!:wallbash: ...relined and good to go!!:hahaha: |
All times are GMT -5. The time now is 01:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands