RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   79 rx7 (https://www.rx7club.com/1st-generation-specific-1979-1985-18/79-rx7-221613/)

Root79Rx7 09-07-03 12:35 PM

79 rx7
 
hi could anyone tell me where i could get a new or good skid plate how much a free flow RB exhaust system would cost, thanks so much matt root

MosesX605 09-07-03 12:42 PM

RB exhaust ranges from about 550 to 680 depending on whether you want the single or dual outlet header. As for the skid plate, go to a wrecker and dig one out.

coldy13 09-07-03 12:43 PM

I have a good skid plate from an '85, I have no clue if it would fit on a '79 though.

RB exhaust- www.racingbeat.com I'd go with the Street-Port system instead of the normal one.

Root79Rx7 09-07-03 01:00 PM

whats the cheepest thing to do for horse power other then port it and turbo?

Root79Rx7 09-07-03 01:02 PM

thanks, the link doesnt work right now ill try later, are you near xenia ohio?

Root79Rx7 09-07-03 01:17 PM

getting rid of the air pump, mine is froze, i took the blelt off, but how hard is it to get it compleatly off? how does this hlep the car for performance once it of, obviously it will be lighter but does it help that much?

coldy13 09-07-03 01:27 PM

Taking off the air pump is easy, but if you still have cat-converters then you need the air pump so they don't destroy themselves and clog your exhaust. If you don't have to worry about emissions, then no problem, take off the air pump and take a BIG screwdriver or pole and hammer to the cats.

I'm in Westerville, about 1 hour away from Xenia.


All times are GMT -5. The time now is 03:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands