6port Compatability GSL-SE / 2nd gen..?
I have a Dellorto w/a RacingBeat upper mainfold mated to a lower 87na manifold.
Is this a direct swap to a 84 GSL-SE 6port motor..? |
Run a fuel pressure regulator with a return (maybe a new low-pressure pump) and yeah, you're nearly there. I'll take your injectors!
|
Yea I know all the basics...
I'm trying to get a heads up if the lower intakes to block are the same bolt pattern... Comparing a GSL-SE to a S4. My memory tells me there are slight differences, but my friend says there is not..??? Or if the lower intake to upper intake patterns match... Again comparing a GSL-SE to a S4 so I could just drop on the RB mani. |
I believe their is a slight difference in the port pattern.
If you look at Racing Beat's website it is listed as different part numbers. Hope this helps |
RB is a good source to compare and also look at Mazdatrix's website. They have all the pics of the intake gaskets so you can compare the intake ports and patterns.....
|
I use a Barry Grant fuel pressure regualtor on my GSLSE with the stock fuel pump feeding a holley.
|
All times are GMT -5. The time now is 10:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands