ok my birthday is coming up soon. so i mite have some money to spend on ma car. ok i have a rotary engine peace from a 79 to 80s (i can get pics) and you did the crome for the mazda rx7 can do you do that for the rotary engine peace because i am going to put it in my hood scoop. and what about for the big mazda for the back? and how much would all that cost with shiping and with mazda speed for the top of the window? and i think my friend is looking for a mazda speed for the top of his front and back window. let me know on msn pm or here. thanks

Damien

ps does anyone know that site where they sell the rotary keys and rotary oil cap? pm me plz

Any chance of getting the "Mazda Rotary Motor" decal for the air cleaner? If so it's time to repaint mine.

Whoops I see he already has that on there. Time to order!

Also, do you have the side emblems and the rear hatch emblems in metallic silver??

Thanks

Ray

Not sure if its just me, but takes forever to open any thread.

I will make more air cleaner decals as soon as I apply the one I made to my own air cleaner and make sure its a 100% fit

I was kinda busy during the weekend :(

I will try to do that tonight.

Please don't mistake our enthusiasm for impatience... lol.

Hi pal.

Sorry about the rotary engine emblem, I would have to charge you a ton of money to do just one of those.

About the mazda logo in the back: do you want a complete decal? or just the chrome to overlay on your existing decal?

I CAN do the mazdaspeed ones, just let me know if he is really interested and I will try to figure the size, curve etc. Please let me know IF HE REALLY WANTS IT cause lately a lot of people asks for a design or quote and then dissapear

chrome overlay on the rear mazda. no prob on the rotary engine i will get some chrome and try that for my self on that. i will have to wait intill he drops by one week. i am allso waiting a mazdaspeed window as well.

I dont have the rear emblem. I would need it to get the overlay

more pics

http://img147.imageshack.us/img147/4...chlogo1pj3.jpg
http://img147.imageshack.us/img147/5...chlogo2dt0.jpg

i pm'd you regarding purchasing a blank cf emblem.

PM replied :)

This came out GREAT

its in white cause its just an example. All decals will be chrome vynil

original
http://img509.imageshack.us/img509/1...2008615qf2.jpg

mine. I didnt even remove the original, just applied the new one over, and its a great match
http://img375.imageshack.us/img375/9...2008618fx2.jpg

Well, my skills with the rattle can paint suck, but the decals came out so good, you can ovelay the new one over the existing one and its a perfect match.

Some pics, ... because we all love pics

http://img296.imageshack.us/img296/4...2008607vl5.jpg
http://img413.imageshack.us/img413/9...2008610cb4.jpg
http://img507.imageshack.us/img507/3...2008611xz0.jpg
http://img296.imageshack.us/img296/9...2008613xn0.jpg
http://img528.imageshack.us/img528/4...2008614lx4.jpg

They look outstanding, sir... When will you be able to make some?

I'd like to get one set of the aircleaner emblems in white, and one set in chrome silver (would look outrageous on a black aircleaner). And one tailgate emblem in chrome.

PM cost shipped to 91709, pls. SevenStock approaches!

More pics!

I cant believe you guys are NOT all over this ...

http://img145.imageshack.us/img145/3042/dsc00219fn2.jpg
http://img145.imageshack.us/img145/5089/dsc00220qw8.jpg
http://img145.imageshack.us/img145/2995/dsc00222hu4.jpg

The one in the middle is the chromed one :)

Looks weird cause the transfer is on top of the vynil making it look like orange peel

http://img367.imageshack.us/img367/2562/dsc00229qj6.jpg

Looks Xlnt to me.

so..yeah what about the prices on these man?...

Don't know how anybody else would feel about this, but what about some 1.1 and 1.3 decals for the side, like the old 5.0 emblems?

http://www.mustangproject.com/images...ZZ-16228-A.jpg

Like that.

Also, what about one in a similar format to the "Intel Inside" insignia that instead says Renesis Inside, or Rotary Inside.

http://www.thewashingtonnote.com/arc...tel-inside.png

Just some thoughts.

From page 2:

THIS JUST IN :p


I already have the rear hatch decal

its chrome vynil and its shaped like the OEM one.

U$S8.50+U$S1.50 shipping gets you one if you want tracking, shipping is a bit more expensive, you have to add another 2 bucks. PICS SOON

The decals to replace the OEM lettering on the 1st gen air cleaner are also ready
U$S10+U$S1.50 gets you one if you want tracking, shipping is a bit more expensive, you have to add another 2 bucks. PICS SOON


ALSO
the side emblems decal, to restore your OEM emblems are ready.
U$S10+U$S1.50 gets you a set for both sides if you want tracking, shipping is a bit more expensive, you have to add another 2 bucks.


my paypal is

xlr8planet@hotmail.com

That is an awesome job....
Are the originals chrome or white???
I have never seen one that was still in good shape to notice BUT it looks like they were white. Can anyone verify... I would like to get one BUT want to stay true to the original.

L8R

My original seemed to be silverish....

The ones Im selling are chrome.

The original plate that came on my SA (I still have it in the spares box) had no emblem at all.

I found one with the emblem on it in a boneyard, and liked it enough that I swapped it.

The emblem on that one was a bit faded, but was silver-colored paint. It has since faded to near invisibility.

The original SA plate seems slightly smaller around the outside edge, and has a faceted edge rather than rounded.

It's more squared off, which may be why it looks smaller. I like the later plate better, even though it is not strictly original.

My decals arrived today; Quality looks excellent. Can't wait to blow some paint and get em on!

Thanks!

Not sure how I missed this thread, but damn those are some really excellent reproductions you're making! I'll definatly be interested in a few when I get paid again ;)

thanks man :D

The FD rear emblems would go like crazy!

I pm'ed you about these:

what great xmas presents for ME ... and my RX7 friends

I'll take:

three air cleaner decals , 2 white, one black
two sets of side RX7 emblems in chrome
and two rear hatch glass emblems , one chrome , one normal

Now for the real challenge; can you do the "small print" on the air-cleaner body - - including the Japanese text?

Customer waiting here, if you can - - one in white, one in chrome.

I guess it can be done, but wont last long, its way too small ... sorry

PM'd about custom shiz :)

Thanks for the honesty; my experience with vinyl lettering is not much, and I wouldn't have thought about the relationship between size and longevity. Ican see where that would make sense, though.

:icon_tup:

Looks like I'll have to dust off my screen-printing skillz.

Can you make these instead of decals into emblems just how you made the rx7 club R emblems? Pm thanks

Nop

The shape is way to complex to get the resin to stay within limits

I want a big rotor biohazard to put on my back glass!! how much

PM sent

how big you want it? in inches I mean :D

Hey man are you still thinking about making that decal I PM'd you about awhile back?

I will finish it this week :D

Thanks homie :noyes:

To everybody reading this, this guy is really nice and easy to work with you should definitely get some decals from him!

Im 200 miles away from home at the moment, but I think I will be back on tuesday

I already finished, but forgot to email the preview to you man, Im sorry.

See my point has been proven! He's honest too!

Haha dude no problem man, it's all good. Thankd for letting me know I'm excited to see it, thanks again!

how about doing a decal to put over the gauge faces. black with white numbers.

to give you an idea of what i mean

Here :)

http://img249.imageshack.us/img249/962/kansasje6.jpg

Man, these are so sweet. I swear youre going to break me!

how much is a set of these in RED shipped to 32746?
if u have them avaliable what shade of red is this going to be ?

I was working really slow today, so I decided to stop and do "the ricer mod" to my dashboard

http://img209.imageshack.us/img209/5...0091555tl1.jpg


http://img209.imageshack.us/img209/8...0091556yb6.jpg


And before you ask, the only amemiya product I have is a keychain :)


I like it

Gabe.get a hold of Me on MSN.(dammit I can't see your Msn Name on my list.Change it again?).Or Pm me.Thanks.

can you do the 84-85 gauges... i would like a set. :)

I dont have a scan of the s3 dash, sorry :(

E-Mail sent

http://img4.imageshack.us/img4/8629/...yarotorka2.jpg