|
Will these fit?
Will these fit with out any modification or wheel adapter, and what tire size would look nice on a stock setup. I'm thinking a 205/50/15 on the back and 195/50/15 on the front. Its a gslse. Thanks guys.
http://www.discounttiredirect.com/di...w=7&vid=006202 |
GSL-SE are 14"
|
Originally Posted by Jibaro 12A
(Post 9867762)
GSL-SE are 14"
|
link doesn't work...I run 205/40r17 all the way around on mine with racing beat springs. Tiny rub on the front with a full lock and tiny bump.http://i222.photobucket.com/albums/d...ock/scoop3.jpg
|
|
What's the offset?
|
From the manufacturer:
DR-19 (GLOSS BLACK, GUN METAL, CHROME, SILVER) DR-19 SIZE: 15x7 / 16x7 / 17x7.5 / 18x7.5 BOLT PATTERN: 15" - (4 x 100/114.3)(5 x 100/114.3) 16" - (4 x 100/114.3)(5 x 100/110/112/114.3) 17" - (4 x 100/114.3)(5 x 100/110/112/114.3/120) 18" - (4 x 100/114.3)(5 x 100/110/112/114.3/120) OFFSET: 15" - 40mm 16" - 40mm 17" - 42mm / 45mm 18" - 42mm / 45mm WEIGHT: 15" - 15.60 lbs / 7.07 kg 16" - 18.20 lbs / 8.25 kg 17" - 20.00 lbs / 9.07 kg 18" - 21.00 lbs / 9.52 kg LIP MEASUREMENT: 15" - 1.4" 16" - 1.4" 17" - 1.43" 18" - 1.43" FINISH: Gloss Black Machined Face, Gold, Gloss Black, Machined Face w/ Gloss Black Lip, Gun Metal, Silver, Chrome |
It should fit fine. It may rub under full lock like 84stock's
"edit" If i would get a set of drag's it would be these. mmmmm 0 offset. http://www.discounttiredirect.com/di...il.do?pc=48695 |
is the offset different between a stock gs and a gsl se? i have a 82 and am looking to run 17s and have the same look as u 84stock. im gonna change my bolt pattern with wheel adapters and they call for a offset of +20. the wheels adapters are 15mm. so that means i should go with +35 offset right? for a 205-40 r17 and maybe a 225 on the back?
|
so this will work fine on the se. 15" - (4 x 100/114.3)(5 x 100/114.3)
|
Originally Posted by ricerockettuner
(Post 9868140)
is the offset different between a stock gs and a gsl se? i have a 82 and am looking to run 17s and have the same look as u 84stock. im gonna change my bolt pattern with wheel adapters and they call for a offset of +20. the wheels adapters are 15mm. so that means i should go with +35 offset right? for a 205-40 r17 and maybe a 225 on the back?
Originally Posted by acekid7
(Post 9868245)
so this will work fine on the se. 15" - (4 x 100/114.3)(5 x 100/114.3)
|
Originally Posted by jshiz
(Post 9868310)
I believe the offset between the GSL-SE and the other models are different. I believe they covered that in the 1st gen fact thread. search around.
4x114.3 is what you'd want. |
don't cheap out on the tires, i did this once and regretted it. BFG traction ta's are pretty sweet along with a lot of the japanese stuff.
|
For sizing on an SE I'd go with either 205/50/15 or 205/55/15 all around
205/55/15 is closer to the stock diameter on an SE I'm running 205/55 on the front and 225/50 on the rear. I have a +32 offset so I'm sticking out 8mm more than you would, but I don't see inside clearance being an issue since the stock wheels are 205 and +40 offset. |
gsl-se rims
2 Attachment(s)
i'm running a 205/50/16 all the way around on 16x7 rims with a +40 offset. i have about a quarter inch clearance on the stock front struts
|
Looks great!!!
I was gonna go with 16" but I couldn't pass up the deal on my rims & tires. They were used for 3 months, then the owner put his winters on and the car got smashed. The whole set including tuner nuts were only $800 and the gold goes so well with the gold pearl in my paint. next comes the wet sanding and pin striping... |
thanks guys i guess ima go with a 205/55 or a 205/50 i just might go with the lower profile one but im not sure yet. maybe in the future i will get some lowering springs
|
| All times are GMT -5. The time now is 07:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands