Wheel/Tire Options
So it has been brought to my attention that there is little to no aftermarket wheel options that fit the (4x110) bolt pattern of my 1985 FB GSL.
I've looked high & low but I admit that I haven't looked all the way in the middle. So far the only two options that I have been able to find are: - KONIG // REWIND - ROTA // OS MESH Does anyone know of any other wheels that would fit a 1985 FB GSL? Any advice is greatly appreciated thank you. -Frostee |
|
Originally Posted by Frostee_fb
(Post 12508400)
So it has been brought to my attention that there is little to no aftermarket wheel options that fit the (4x110) bolt pattern of my 1985 FB GSL.
I've looked high & low but I admit that I haven't looked all the way in the middle. So far the only two options that I have been able to find are: - KONIG // REWIND - ROTA // OS MESH Does anyone know of any other wheels that would fit a 1985 FB GSL? Any advice is greatly appreciated thank you. -Frostee |
Originally Posted by raven12aFB
(Post 12508490)
Me personally I like the way the 7 looks with the factory 13s but I will choose the Rota OS Mesh before I choose the Rewinds......I think they are butt ugly and everyone has them......IMHO......
|
Mazdatrix will sell you some Panasports, which are better wheels than Rota or Konig.
They have 15s and 13s. 15s are MUCH easier to find tires for, though. https://mazdatrix.com/product/wheel-...en-4x110-race/ Imagine doing a Turbo II brake swap and rolling around on 5 x 114.3 . ;) *wink wink, nudge nudge* |
|
Originally Posted by Natey
(Post 12508520)
Mazdatrix will sell you some Panasports, which are better wheels than Rota or Konig.
They have 15s and 13s. 15s are MUCH easier to find tires for, though. https://mazdatrix.com/product/wheel-...en-4x110-race/ Imagine doing a Turbo II brake swap and rolling around on 5 x 114.3 . ;) *wink wink, nudge nudge* I like your style..idkw I didn't think about that 😉 Good looking out on that GENIUS idea... I'm still pretty new to the whole Rotary thing but I know that that is something that gets done all the time to other older vehicles. Thank you for your insight. It is much appreciated. |
Originally Posted by Frostee_fb
(Post 12508493)
I definitely like the OS MESH better but I haven't been able to find where to buy them. May have to go straight to the source. The OEMs that I have are clapped, I'm looking daily to find any other options besides the 3 that I've found.
My oem 13s we're really bad.....but I worked on them....hard and got them refinished..... I was going to polish them after all the sanding but everyone has the polished.....so I painted them......and if I want later down the road I can strip them bare again and polish them.....but I like the look..... https://cimg2.ibsrv.net/gimg/www.rx7...2422fcd1d9.jpg https://cimg3.ibsrv.net/gimg/www.rx7...c16b7799ca.jpg |
Originally Posted by raven12aFB
(Post 12508557)
My oem 13s we're really bad.....but I worked on them....hard and got them refinished..... I was going to polish them after all the sanding but everyone has the polished.....so I painted them......and if I want later down the road I can strip them bare again and polish them.....but I like the look.....
https://cimg2.ibsrv.net/gimg/www.rx7...2422fcd1d9.jpg https://cimg3.ibsrv.net/gimg/www.rx7...c16b7799ca.jpg |
Originally Posted by Frostee_fb
(Post 12508558)
that's actually not a bad idea either until I get the time/money for the BBK...
I love the way my 13s look.... I also got a set of Draglites in 15x3 and 15x8 in storage.... https://cimg3.ibsrv.net/gimg/www.rx7...5dcb427f14.jpg |
Originally Posted by raven12aFB
(Post 12508572)
It's easier than spending a grand on wheels and then get tires.....
I love the way my 13s look.... I also got a set of Draglites in 15x3 and 15x8 in storage.... https://cimg3.ibsrv.net/gimg/www.rx7...5dcb427f14.jpg |
Originally Posted by Frostee_fb
(Post 12508574)
Those look SICK... I bet with the right set of tires those would look BOSS on an FB
https://cimg8.ibsrv.net/gimg/www.rx7...53bb2c2571.jpg https://cimg7.ibsrv.net/gimg/www.rx7...5fd95dab41.jpg |
Originally Posted by raven12aFB
(Post 12508643)
If i decide to install the Draglites it should like this more or less .....(no idea who owns it .... found it on the internet)
https://cimg8.ibsrv.net/gimg/www.rx7...53bb2c2571.jpg https://cimg7.ibsrv.net/gimg/www.rx7...5fd95dab41.jpg |
Originally Posted by Frostee_fb
(Post 12508644)
Yeah, that definitely has that 80s vibe to it. Correct me if I'm wrong but isn't the bolt pattern a 4 x 108 on the Draglites? I wasn't able to find and that were for a 4 x 110
https://cimg4.ibsrv.net/gimg/www.rx7...2dff3984a1.jpg https://cimg4.ibsrv.net/gimg/www.rx7...15c8811933.jpg |
All times are GMT -5. The time now is 05:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands