[For Sale] GB: EVO-R RX-7 FD3S Carbon Door Panels Special
03-01-15, 09:54 PM
#1
GB: EVO-R RX-7 FD3S Carbon Door Panels Special
Many ask me to put up a GB for our EVO-R RX-7 FD3S Carbon Door Panels.
Here is the deal. Retail $889 plus shipping $85
Special offer $790 plus shipping $85. (Outside U.S Please contact me for shipping) I currently have 3 sets in stock. Ready to ship.
Note: These will fit left hand drive RX-7 only.
Limited 10 sets only. GB ends after 10 sets.
================================================
1- gen3rx@mac.com MazdaspeedR1 - Paid Full - Red strap
2-arman_sahakyan@hotmail.com armans - Paid Full - Red strap
3- jankymike@gmail.com OneFast7 - Paid full - Red strap
4-
5-
6-
7-
8-
9-
10-
Paypal at evornet@aim.com
Video of door open and close
Your choice of passenger side door pull strap
Here is the deal. Retail $889 plus shipping $85
Special offer $790 plus shipping $85. (Outside U.S Please contact me for shipping) I currently have 3 sets in stock. Ready to ship.
Note: These will fit left hand drive RX-7 only.
Limited 10 sets only. GB ends after 10 sets.
================================================
1- gen3rx@mac.com MazdaspeedR1 - Paid Full - Red strap
2-arman_sahakyan@hotmail.com armans - Paid Full - Red strap
3- jankymike@gmail.com OneFast7 - Paid full - Red strap
4-
5-
6-
7-
8-
9-
10-
Paypal at evornet@aim.com
Video of door open and close
Your choice of passenger side door pull strap
Last edited by fd3s777; 03-12-15 at 10:23 PM.
Trending Topics
03-20-15, 10:11 AM
#21
---------------
iTrader: (1)
Join Date: Aug 2014
Location: Killeen, Texas 76542
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I got my door panels in yesterday and I have a few tips for people interested in them
Review: Overall quality and finish is nice. They are extremely light weight.
There where no posts or mounting for the ac vent. In order to mount it, I used 3m black super weatherstrip and gasket adhesive. I simply held it in place and let the adhesive flow around the back side and corners. Its thick enough that it won't leak out the front side of it. After it became tacky I added more to finish it up and wedge a box between the vent and the door panel to put pressure on it. The next morning, solid like a rock.
The window switch opening on the passenger side wasn't opened up enough, no biggy. I'd rather have it too small and let me sand it down then too big
Im still trying to figure out why the hole was left on the passenger panel below the passenger window switch. The support for the handle isnt used anymore so I don't know.
The screw holes along the edge of the panels deffintely don't have a finished look/feel to them.. Fiberglass fibers and sticking out and some of them are oblonged. Still figuring out how I can finish them up better. I may cut down the original plastic gromits from my original door panels and fit them to take up some space in the holes.
Overall pretty pleased. Although some small issues, all should be easily fixed. I would without a doubt recommend them for sure.
Thanks
Review: Overall quality and finish is nice. They are extremely light weight.
There where no posts or mounting for the ac vent. In order to mount it, I used 3m black super weatherstrip and gasket adhesive. I simply held it in place and let the adhesive flow around the back side and corners. Its thick enough that it won't leak out the front side of it. After it became tacky I added more to finish it up and wedge a box between the vent and the door panel to put pressure on it. The next morning, solid like a rock.
The window switch opening on the passenger side wasn't opened up enough, no biggy. I'd rather have it too small and let me sand it down then too big
Im still trying to figure out why the hole was left on the passenger panel below the passenger window switch. The support for the handle isnt used anymore so I don't know.
The screw holes along the edge of the panels deffintely don't have a finished look/feel to them.. Fiberglass fibers and sticking out and some of them are oblonged. Still figuring out how I can finish them up better. I may cut down the original plastic gromits from my original door panels and fit them to take up some space in the holes.
Overall pretty pleased. Although some small issues, all should be easily fixed. I would without a doubt recommend them for sure.
Thanks
Last edited by OneFast7; 03-20-15 at 11:51 PM.
