[For Sale] Adaptronic Modular FD3S Plug and Play ECUs
#1
Adaptronic Modular FD3S Plug and Play ECUs
Adaptronic Modular FD3S S6 & S7/S8 Plug and Play ecus are now available! We have 5 ecus being assembled and shipping to us next week. We are including a free remote tuning session with each one of these first units. These units have been fully tested on multiple vehicles, including 2 different single turbo FD3S Rx7s. The full production batch will start in a couple weeks.
Blog post regarding the technical aspecs of the new ecu;
https://blog.turbosource.com/2016/03...gement-system/
Purchasing;
http://www.turbosource.com/Adaptroni...s-amrx7pnp.htm
Blog post regarding the technical aspecs of the new ecu;
https://blog.turbosource.com/2016/03...gement-system/
Purchasing;
http://www.turbosource.com/Adaptroni...s-amrx7pnp.htm
Last edited by Turblown; 10-26-16 at 09:01 AM.
#5
Rotary Enthusiast
iTrader: (9)
I'm looking at upgrading from my PFC/Datalogit to this ECU over the winter and adding your WI kit at the same time.
I have a stockish car with stock sequential turbos. Fuel mods coming fairly soon.
What additional sensors, if any, do you think would be prudent to order?
I'm thinking fast-reacting air temp and maybe the 3-way BCS?
Thanks
I have a stockish car with stock sequential turbos. Fuel mods coming fairly soon.
What additional sensors, if any, do you think would be prudent to order?
I'm thinking fast-reacting air temp and maybe the 3-way BCS?
Thanks
Trending Topics
#19
I have had my first chance to tune a modular and no issues;
Here is a video of the car;
https://www.instagram.com/p/BNe4UR6j...en-by=turblown
A screen shot and some information on how the new software makes tuning even easier;
https://www.instagram.com/p/BNhnrq_j...en-by=turblown
I have this car street tuned to 17 psi with no issues.
Here is a video of the car;
https://www.instagram.com/p/BNe4UR6j...en-by=turblown
A screen shot and some information on how the new software makes tuning even easier;
https://www.instagram.com/p/BNhnrq_j...en-by=turblown
I have this car street tuned to 17 psi with no issues.
#22
20B installation using a PNP Modular ecu. You can use the FD PNP with some harness mods( for 3rd rotor fuel/ingition) if using 2 injectors per rotor. M2000 wire in also works in the same fashion. M6000 wire in should be used if doing 3 or more injectors per rotor;