Where to get these brake clips?
#1
Changed my rear rotors and pads today and noticed a metal v shaped clip connecting to a little hole on the top of each pad. But I only had one on each side.
There are 2 more holes at the bottom where either its for another clip or the hole for the clip would be on both sides regardless since it doesnt matter which side the pads are on. Im going with the later just because old pads wore uneven.
Do they sell these at an auto part store or do I have to get this from mazda.
Sorry for the double upload. Did it all from the phone
There are 2 more holes at the bottom where either its for another clip or the hole for the clip would be on both sides regardless since it doesnt matter which side the pads are on. Im going with the later just because old pads wore uneven.
Do they sell these at an auto part store or do I have to get this from mazda.
Sorry for the double upload. Did it all from the phone
#4
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes
on
66 Posts
The "V" spring is only used one per caliper and goes on the lower end of the pads.
Thus two springs is all that is needed for the rear brakes.
Page P-27 of the FSM.
Thus two springs is all that is needed for the rear brakes.
Page P-27 of the FSM.
Thread
Thread Starter
Forum
Replies
Last Post
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM