YoshiFD3S

iTrader: (19)

18X9.5 +45 Enkei RPF1's with 275/35/18 Toyo R888's all around

Lowered, stock fenders, pulled and rolled.

timeXlost

iTrader: (1)

VS-XX 18x9.5/10.5 +22 245/35 265/35. rolled and pulled front, rolled rear.

Jose A.

iTrader: (40)

With the latest set and new paint

10-19 with 285 fronts
12-27 with 305 rears

speedjunkie

iTrader: (3)

Looks good, Jose!

I'll be posting pics of my new setup sometime in the next few months hopefully. BWAHAHAHA!!!

Jose A.

iTrader: (40)

Thanks dude!

Cant wait to see if you go thru with the wheels

speedjunkie

iTrader: (3)

Oh I'm going through with them as long as everything works out. If this doesn't happen, it won't be on my end haha. He is starting to do the CAD right now, I'm just shopping around for lips and barrels so he knows all the specs for the mounting flange. After that, I'll see if my coworker's buddy or someone else in C Springs or Denver can cut them, then get them coated, chromed or whatever, then on the car. I'm so stoked lol.

Driftfc3s

iTrader: (11)

It's been a while since I posted. Current setup is 18x10.5 +15mm all around. Tires are ADVAN A048's 265/35 and 295/30.

speedjunkie

iTrader: (3)

And it still looks great!

stickboie

18x10.5 255/35/18
F-et22 R-et7

jorx7

iTrader: (11)

will these fit on my fd ???

rpf 01 enkies 17x9.5 +18 front
18x10.5 +15 rear

speedjunkie

iTrader: (3)

Not without pulling the fenders a bit. The rear about an inch, and the front about half inch at least. Depends on tire fitment too though. If you stretch enough you MAY be able to pull it off.

Actually it looks like stickboie pulled it off. If I'm reading this correctly, the rears are 18x10.5 +7, and his tire looks to be stretched quite a bit. So you could probably make it work. I'm not sure how that's possible though because my RPF1 10.5 +15 stuck out about an inch from the stock fender. And 9.5 +22 on the front was pretty even with the fender.

ninesixtwo

iTrader: (9)

18x10 +35 (w/5mm spacer) front
18x10.5 + 25 (needs a 5mm)

GoodfellaFD3S

iTrader: (213)

^Your FD looks freaking amazing

I especially love how the tires actually *fit* on the wheels

silverTRD

iTrader: (36)

Nice pic 962!

RCCAZ 1

iTrader: (10)

^Agreed, very nice. 962, which rear wing is that? Also, diffuser manufacturer?? Beautiful rolling shot!

ninesixtwo

iTrader: (9)

^^ Thanks guys. Rear wing is Vorschlag, diffuser is by DAMD. Can't seem to edit the dead link in my first post:

RCCAZ 1

iTrader: (10)

^^Hmmm, and the nose? Amemiya? Almost looks like Burnout, but I know that's not right! Interesting combo. I like it!

Jose A.

iTrader: (40)

That if im not wrong is the URAS bumper

jayr_

iTrader: (2)

hai

Jose A.

iTrader: (40)

You need to post wheel and tire specs in this thread. If its just to show the car, there is a thread for that.

jayr_

iTrader: (2)

I posted it before I believe but
18x10 et 18 215/40
18x10.5 et 5 225/40

vip modular vxs 610s

stickboie

Running a similar set up next year. All 18in tho. And 18x10 et38 front, with a 12mm spacer and 10mm spacer out back. also gonna run a 265 in the rear and the same 255 up front. Im at 0 degree camber all the way around but if you were to go -3 or -4 up front you can run all the same size with rims being 18x10.5 et15. But I'm not that guy. I hate that crap. Each there own i guess. Keep in mind that my rear quarter is flared about an inch to 1.5. The front is rolled not pulled.

front 18x10 et38 w/12mm spacer 255/35
rear 18x10.5 et15 w/10mm spacer 265/35 gonna be tight but i can remove the space if i wanna go lower so that it will clear the quarter if needed.

speedjunkie

iTrader: (3)

Do you have any closer pics of your rear quarter? Did you do it yourself?

Jelloman457

iTrader: (1)

Anyone know sizing on this beauty? I'm loving this setup.

Drobs42

iTrader: (4)

That's Rennas car aka jhnrx7 I believe they're 18x10 with a 265 not 100% sure on the offset but all the info is on his Flickr page.