single turbo/dual waste gate
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jul 2014
Location: Ontario, Canada
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
single turbo/dual waste gate
I couldn't find ay dual waste gate plumbing diagrams, I'm not sure if they are suppose to run in series or in parallel pictures are alays a good reference to me.
also on the waste gate line do i have to run it into the intercooler tubing or can i run it into the upper intake manifold? (right after TB)
also on the waste gate line do i have to run it into the intercooler tubing or can i run it into the upper intake manifold? (right after TB)
#2
Instrument Of G0D.
iTrader: (1)
Boost refferance usually from compressor housing or on intercooler piping as close to turbo as possible, to the bottom nipple on 'gate. Have a look at installation manuals online for your wastegate if you havnt got it, or if knock off brand check tial or turvosmart sites or whatever. They all work the same way. For twins just Tee everything.
#3
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jul 2014
Location: Ontario, Canada
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Boost refferance usually from compressor housing or on intercooler piping as close to turbo as possible, to the bottom nipple on 'gate. Have a look at installation manuals online for your wastegate if you havnt got it, or if knock off brand check tial or turvosmart sites or whatever. They all work the same way. For twins just Tee everything.
i have 2 tial 38mm mvr wastegates, I'm just going to tap in a nipple on my turbo
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
demetlaw
3rd Generation Specific (1993-2002)
6
10-02-15 06:22 PM