RX7Club.com


Go Back   RX7Club.com > Tech and Performance > Single Turbo RX-7's

Welcome to RX7Club.com!
Welcome to RX7Club.com,

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join RX7Club.com today!


Reply
 
Thread Tools Display Modes
Old 09-26-09, 10:44 PM   #76
enzo250
"el rookie"
 
enzo250's Avatar
 
Trader Score: (0)

Join Date: Aug 2001
Location: NY
Posts: 1,625
Update.. Today we ran the car at ATCO Raceway...

The car no longer has a GT35R and is now running a S475.
Motor however is still the same stocker...

It's amazing what punishment it has been taking so far...

Anyhow it went 9.85 @ 142.99

Video's are posted in this thread:
http://www.rx7club.com/showthread.ph...72#post9523072
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on RX7Club.com!
__________________
"Need Traction"
enzo250 is offline   Reply With Quote
Old 09-27-09, 06:30 AM   #77
lainardDUH
New Member
 
Trader Score: (1)

Join Date: May 2009
Location: carson,CA
Posts: 13
oh man that sounds awesome
lainardDUH is offline   Reply With Quote
Old 09-28-09, 09:48 AM   #78
janrx7
dominican boost junkie
 
janrx7's Avatar
 
Trader Score: (0)

Join Date: May 2008
Location: Dominican Republic
Posts: 325
So this engine has stock ports and is not dowel?
__________________
Streetported- Pt-67 turbo with 429whp@15psi. Mods Power fc, 850cc X 4, Act Solid 4 puck clutch, V mount Intercooler, Twin Spark, Downpipe, Catback,Denso fuel pump,All NGK 9s plugs,Amemiya intake filter. Custom manifold,tial 40mm wastegate and tial bov

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
janrx7 is offline   Reply With Quote
Old 09-28-09, 10:00 AM   #79
NissanConvert
Someone help me!
 
Trader Score: (0)

Join Date: Sep 2005
Location: Woodridge, IL
Posts: 1,351
Send a message via AIM to NissanConvert Send a message via Yahoo to NissanConvert
In the last video (9.85) it looks like the domestic next to you had a parachute. It also looked slow by comparison.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
href="
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
target="_blank">Celebrate February 1st, the 50th anniversary of a running rotary!
NissanConvert is offline   Reply With Quote
Old 09-28-09, 10:37 AM   #80
turboR1
"9.85 @ 142.99 mph"
 
turboR1's Avatar
 
Trader Score: (0)

Join Date: Feb 2002
Location: new york
Posts: 870
Quote:
Originally Posted by janrx7 View Post
So this engine has stock ports and is not dowel?
The motor has never been opened and has over 70k miles on it !
__________________
1993 FD R1 S475 Autronic 709.9rwhp 32psi E85 Stock Ports
1998 M3\4 estoril S54 swap Autronic SM4
*Enzo Racing Tuned*

9.85 @ 142.99 mph 1.46 60'
"low boost"
turboR1 is offline   Reply With Quote
Old 09-28-09, 11:05 AM   #81
wotnartd
Play Well
 
wotnartd's Avatar
 
Trader Score: (6)

Join Date: May 2005
Location: Green Bay, WI
Posts: 2,333
Send a message via ICQ to wotnartd Send a message via AIM to wotnartd Send a message via MSN to wotnartd Send a message via Yahoo to wotnartd
Enzo, that is PHENOMENAL! You are giving me such hope for my stock 13BT build, which will be getting the E85 treatment, as well.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
wotnartd is online now   Reply With Quote
Old 09-28-09, 11:15 AM   #82
black06g85
that random guy
 
black06g85's Avatar
 
Trader Score: (2)

Join Date: Jun 2007
Location: Queens, NY
Posts: 221
I need to bring my car to you guys for a tune. gt3582r 1.06 a/r large street port.
__________________
2006 cobalt ss/sc turbo swap 500+whp (until motor blew lol)
9500 rpm pull (2nd one)

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


93 RX-7 383WHP 12psi pump gas

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
black06g85 is offline   Reply With Quote
Old 10-01-09, 04:34 PM   #83
TuRbOnOs7
Hardcore Rx7 *****
 
Trader Score: (0)

Join Date: Oct 2007
Location: Bakersfield & San Diego, CA
Posts: 13
Send a message via AIM to TuRbOnOs7
Damn...looks like E85 is the way to go then uh? Why did you change the turbo?
__________________
TURBO+NOS+RX7 =TuRbOnOs7 '93 Single Turbo, PFC
'85 GSL-SE Gray W/ '93 block, single turbo, microtech LTS-12
TuRbOnOs7 is offline   Reply With Quote
Old 10-01-09, 04:40 PM   #84
G's 3rd Gen
Get em' hot!
 
G's 3rd Gen's Avatar
 
Trader Score: (6)

Join Date: Sep 2003
Location: Home of the Rolex 24
Posts: 2,590
Damn! Looked like the car was wanting to get squirley but driver did a hell of a job keeping it straight! Awesome and congrats! G
__________________
1993 base silverstone metallic, 99 spec.. A-spec t4 35r : 360@ 13psi and 420 @ 17psi 93 octane
G's 3rd Gen is offline   Reply With Quote
Old 10-01-09, 05:52 PM   #85
turboR1
"9.85 @ 142.99 mph"
 
turboR1's Avatar
 
Trader Score: (0)

Join Date: Feb 2002
Location: new york
Posts: 870
Quote:
Originally Posted by TuRbOnOs7 View Post
Damn...looks like E85 is the way to go then uh? Why did you change the turbo?
E85 had nothing to do with it thats just the fuel i use.. Its all in the tuning and driving to get it down the track. The same could have been done with C16 or Q16 it just would have cost more thats all. In fact Q16 would prob have given me more power.

The turbo was changed because it was maxed out at 515rwhp and that was not enough for a 9 second pass I needed a little bit more power.

I should easily be able to pull 9.50s out of this car the way it is I still have 100 more hp to play with. Well see what happens in the next few weeks.
__________________
1993 FD R1 S475 Autronic 709.9rwhp 32psi E85 Stock Ports
1998 M3\4 estoril S54 swap Autronic SM4
*Enzo Racing Tuned*

9.85 @ 142.99 mph 1.46 60'
"low boost"
turboR1 is offline   Reply With Quote
Old 10-01-09, 07:45 PM   #86
WaachBack
Finally Knows
 
WaachBack's Avatar
 
Trader Score: (12)

Join Date: Sep 2003
Location: Hawaii
Posts: 919
Send a message via AIM to WaachBack
What kind of clutch/trans/rear end are you running?
__________________
1993 R1, Ported, built and tuned by me.

Old Setup: Non-Seq stock twins @ 18psi on 92 Pump with 315cc W/I. - 11.4@117 Mph.

New Setup: GT35/74@24psi single turbo on 92 Pump with 550cc W/I - xx@xxx Mph.
WaachBack is offline   Reply With Quote
Old 10-08-09, 07:40 PM   #87
7passu
Marc
 
7passu's Avatar
 
Trader Score: (5)

Join Date: Nov 2004
Location: Mississippi
Posts: 251
Send a message via AIM to 7passu Send a message via Yahoo to 7passu
He is running a act clutch...thats it. Drive line is stock. But what is your injector combo (850/1600 ??) also are you on the PFC or something else?
7passu is offline   Reply With Quote
Old 10-09-09, 09:08 PM   #88
94bimmer
New Member
 
Trader Score: (0)

Join Date: Oct 2009
Location: ct
Posts: 1
i also have a e36 325 im swapping in a 13btt..going single turbo as well..now is your motor pretty much bone stock?
94bimmer is offline   Reply With Quote
Old 10-10-09, 12:02 PM   #89
dregg100
registered car nut
RX7Club Vendor
 
dregg100's Avatar
 
Trader Score: (27)

Join Date: Nov 2004
Location: SC
Posts: 5,514
Send a message via AIM to dregg100 Send a message via Yahoo to dregg100
Quote:
Originally Posted by 7passu View Post
He is running a act clutch...thats it. Drive line is stock. But what is your injector combo (850/1600 ??) also are you on the PFC or something else?
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

MDRotary
Your source for Borg Warner turbos! PM me for pricing
Affordable Rebuilds. PM for pricing
Haltech EMS now available!!
864-414-7179
dregg100 is offline   Reply With Quote
Old 10-10-09, 10:37 PM   #90
7passu
Marc
 
7passu's Avatar
 
Trader Score: (5)

Join Date: Nov 2004
Location: Mississippi
Posts: 251
Send a message via AIM to 7passu Send a message via Yahoo to 7passu
I know his resent set-up is 8 1000cc but what was it with just the gt35 on it when made his first pass?
7passu is offline   Reply With Quote
Old 10-12-09, 06:56 AM   #91
black06g85
that random guy
 
black06g85's Avatar
 
Trader Score: (2)

Join Date: Jun 2007
Location: Queens, NY
Posts: 221
nice to meet you yesterday, too bad our car lost a trans on it's second pass, didn't get to hang around to watch the evo and the rx run. was a long slow ride home last night lol. hopefully have my car down to you soon, I'll be giving you a call tomorrow to set up a day.
btw exact setup is:
large street ported motor
GT3582r T4 1.06 a/r 3" v-band outlet divided housing
greddy 3.5" catback
550/1600's, walbro pump, power FC, koyo n-flo rad, fmic, aem tru-boost, wideband, act 6 puck, might have the meth injection in the car, trans brace, rear brace, and I think that's about it.
__________________
2006 cobalt ss/sc turbo swap 500+whp (until motor blew lol)
9500 rpm pull (2nd one)

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


93 RX-7 383WHP 12psi pump gas

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
black06g85 is offline   Reply With Quote
Old 10-12-09, 12:07 PM   #92
dhahlen
FD Under Construction =P
 
dhahlen's Avatar
 
Trader Score: (2)

Join Date: Jun 2003
Location: Avondale, AZ
Posts: 3,846
Send a message via ICQ to dhahlen Send a message via AIM to dhahlen Send a message via Yahoo to dhahlen
Man, these threads give me a boner... haha, mostly because I'm running E85 on a GT4094R with a ridiculous port.

Great time, I really can't wait to see how E85 performs in the FD.
__________________
AIM/YAHOO: dhahlen
dhahlen is online now   Reply With Quote
Old 10-12-09, 05:33 PM   #93
7passu
Marc
 
7passu's Avatar
 
Trader Score: (5)

Join Date: Nov 2004
Location: Mississippi
Posts: 251
Send a message via AIM to 7passu Send a message via Yahoo to 7passu
When running 6 or more injectors, are you running the greddy elbow with 2 there or the lower intake that can hold 4 injectors and or both?
7passu is offline   Reply With Quote
Old 10-13-09, 02:19 AM   #94
7passu
Marc
 
7passu's Avatar
 
Trader Score: (5)

Join Date: Nov 2004
Location: Mississippi
Posts: 251
Send a message via AIM to 7passu Send a message via Yahoo to 7passu
Last question....what coil/ ignition set-up is/ was used??
7passu is offline   Reply With Quote


Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PLEASE HELP: im using 1 qt for aprx. every 130 mi PLEASE 13bchris West RX-7 Forum 7 09-24-07 08:39 PM
GT35R , stock ports, and plugs tuning results cewrx7r1 Single Turbo RX-7's 36 07-28-07 05:14 PM
397rwhp @16psi w/ GT35r, Stock Ports FourtyOunce Single Turbo RX-7's 18 09-18-05 11:17 PM
130,000+ on stock turbos!!!! smerkinseven 3rd Generation Specific (1993-2002) 9 12-20-02 07:12 PM
14.560@130 with this amazing stock turbo! tesla042 2nd Generation Specific (1986-1992) 16 10-15-02 11:51 PM


All times are GMT -5. The time now is 05:09 PM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
All content Copyright © 2007 by Internet Brands, Inc.
Inactive Reminders By Mished.co.uk